System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
51
EN
4.3.4 Detail Counter
The function of Detail Counter collects any information and provides the
counting about the traffic of the port, no matter the packet is good or bad.
In the following figure the window can show only one port counter informa-
tion at the same time. To see another port’s counter, you have to pull down
the list of Select, then you will see the figures displayed about the port you
had chosen.
Each data field has 20-digit long. If the counting is overflow, the counter will
be reset and restart counting. The data is updated every time interval defined
by the user. The valid range is 3 to 10 seconds. The Refresh Interval is used to
set the update frequency. Default update time is 3 seconds.
쮿 Function name: detail Counter
쮿 Function Description: Display the detailed counting number of each port’s
traffic. The window can show all counter information of each port at one
time.
쮿 Parameter Description:
왏 Rx Packets: The counting number of the packet received.
왏 Rx Octets: Total received bytes.
왏 Rx Errors: Number of bad packets received.
왏 Rx Unicast Packets: Show the counting number of the received unicast
packet.
왏 Rx Broadcast Packets: Show the counting number of the received
broadcast packet.