System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
50
EN
왏 Mon1(Bias) mA: Show the Bias current of module.
왏 Mon2(TX PWR): Show the transmit power of module.
왏 Mon3(RX PWR): Show the receiver power of module.
4.3.3 Simple Counter
The function of Simple Counter collects any information and provides the
counting about the traffic of the port, no matter the packet is good or bad.
In the following figure, the window can show all ports’ counter information at
the same time. Each data field has 20-digit long. If the counting is overflow,
the counter will be reset and restart counting. The data is updated every time
interval defined by the user. The valid range is 3 to 10 seconds. The Refresh
Interval is used to set the update frequency. Default update time is 3 seconds.
쮿 Function name: Simple Counter
쮿 Function Description: Display the summary counting of each port’s traffic,
including Tx Byte, Rx Byte, Tx Packet, Rx Packet, Tx Collision and Rx Error
Packet.
쮿 Parameters Description:
왏 Tx Byte: Total transmitted bytes.
왏 Rx Byte: Total received bytes.
왏 Tx Packet: The counting number of the packet transmitted.
왏 Rx Packet: The counting number of the packet received.
왏 Tx Collision: Number of collisions transmitting frames experienced.
왏 Rx Error Packet: Number of bad packets received.