System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
34
EN
왏 System Description: As it is, this tells what this device is. Here, it is
“24-Port 10/100BaseT/TX Managed PoE Switch”.
왏 Location: Basically, it is the location where this switch is put. User-
defined.
왏 Contact: For easily managing and maintaining device, you may write
down the contact person and phone here for getting help soon. You
can configure this parameter through the device’s user interface or
SNMP.
왏 Device name: The name of the switch. User-defined. Default is PSES-
2126C.
왏 System up time: The time accumulated since this switch is powered
up. Its format is day, hour, minute, second.
왏 Current time: Show the system time of the switch. Its format: day of
week, month, day, hours : minutes : seconds, year. For instance, Tue
Apr 20 23:25:58 2005
왏 BIOS version: The version of the BIOS in this switch.
왏 Firmware version: The firmware version in this switch.
왏 Hardware-Mechanical version: The version of Hardware and Mecha-
nical. The figure before the hyphen is the version of electronic hard-
ware; the one after the hyphen is the version of mechanical.
왏 Serial number: The number is assigned by the manufacturer.
왏 Host IP address: The IP address of the switch.
왏 Host MAC address: It is the Ethernet MAC address of the management
agent in this switch.
왏 Device Port: Show all types and numbers of the port in the switch.
왏 RAM size: The size of the DRAM in this switch.
왏 Flash size: The size of the flash memory in this switch.
4.2.2 IP Configuration
IP configuration is one of the most important configurations in the switch.
Without the proper setting, network manager will not be able to manage or
view the device. The switch supports both manual IP address setting and
automatic IP address setting via DHCP server. When IP address is changed,
you must reboot the switch to have the setting taken effect and use the new
IP to browse for web management and CLI management.