System information

LANCOM ES-2126+ und LANCOM ES-2126P

쮿 Chapter 3: Configuring and monitoring the LANCOM switch

Here you can save the current configuration to the flash memory as a user

configuration.

쮿 Restore default configuration (includes default IP address)

Here you can reset the switch to its factory settings. The default configu-

ration replaces the start configuration. The device is reset to Auto DHCP

and it retrieves its IP address from a DHCP server in the network. If no

DHCP server is available, the device takes the IP address “172.23.56.252”

(LANCOM ES-2126+) or “172.23.56.251” (LANCOM ES-2126P).

쮿 Restore default configuration (excludes current IP address)

Here you can reset the switch to its factory settings. The default configu-

ration replaces the start configuration. However, the switch’s current IP

address as set up by the user is not changed and will NOT be restored to

the default value.

쮿 Restore user configuration

Restore User Configuration function retrieves the previous confirmed wor-

king configuration from the flash memory to update the start configura-

tion. After restoring the configuration, the system’s start configuration is

updated and activated after rebooting.

3.2.2 Config file

쮿 Config file

With this function you can backup or reload the start and user configura-

tion via TFTP.

쮿 Parameter