System information

LANCOM ES-2126+ und LANCOM ES-2126P

쮿 Chapter 3: Configuring and monitoring the LANCOM switch

3 Configuring and monitoring the LANCOM

switch

3.1 Configuration options

There are two different methods of configuring the device.

쮿 By means of a graphical user interface or via a browser (WEBconfig). This

option is only available if you have network access to the device's IP

address from your computer. With a LANCOM ES-2126+ you can access

WEBconfig via a encrypted connection over SSL as well.

Instructions for configuring the device with WEBconfig are available in the

chapter "Web-based configuration".

쮿 Text-orientated configuration via a console (Command Line Interface –

CLI): This method of configuration, which requires a program such as Tel-

net, SSH (LANCOM ES-2126+ only) , Hyperterminal, or similar, can be con-

ducted over a network connection or with a direct connection via serial

interface (RS-232).

Instructions for configuring the device with CLI are available in the chap-

ter "Command line interface".

3.1.1 Starting WEBconfig

There are two ways of starting the configuration by browser:

쮿 If you know the device's IP address, simply enter this into the address line

in the browser. The factory settings for accessing the device are: User

name "admin", password "admin".