System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 5: Operation of CLI Management
199
EN
<wrr|strict>: wrr or strict
<wrr_0 to 3>: 1-55.
왏 Example:
PSES-2126C(qos)# set sche wrr 1 2 8 16
쮿 set tos
왏 Syntax:
set tos <type_value> [<q0><priority>] [<q1><priority>]
[<q2><priority>]
[<q3><priority>]
왏 Description:
To set IP tos qos weighting for 4 queues.
왏 Argument:
<type_value>: Delay Priority: 0;
Throughput Priority: 1;
Reliability Priority: 2;
Monetary Cost Priority: 3.
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different
priorities.
You don't need to use all of queues, but must assign queues in order
(from low queue to high queue).
왏 Syntax: 1,2 or 2,5-7, available from 0 to 7.
왏 Possible value:
<type_value>: 0~3
<priority>: 0 to 7.
왏 Example:
PSES-2126C(qos)# set tos 0 q0 1 q1 2 q2 4 q3 6
쮿 set vip
왏 Syntax:
set vip <port_range> <mode>
왏 Description:
To set vip port for strict priority.