System information

LANCOM ES-2126+ und LANCOM ES-2126P

쮿 Chapter 2: Installation

쐃 CPU RUN

Blinks green if the CPU is running without problem.

쐇

PWR

Power LED: Constant green when power is supplied to the device.

쐋

PoE-ACT

Constant green when the device connected to this port is powered via PoE.

쐏

LINK

Port 1 to 24

Constant green when the network connection is established to the connected

device. Off if no network connection can be established to the connected

device.

쐄

ACT/FDX/SPD

Port 1 to 24

This LED displays the following information depending on the selected LED

status:

쮿 LED mode “Active”: Blinks yellow during data transfer.

쮿 LED mode “Full-Duplex”: Constant green when full-duplex mode is active

for this port; blinks yellow in case of collisions.

쮿 LED mode “Speed”: Constant yellow when the 100 Mbps mode is active.

Off when the 10 Mbps mode is active.

쐂

ACT

Constant green when the LED mode is set to "Active".

쐃

쐇

쐋

쐏







쐊

쐎

쐅

쐈