System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
103
EN
LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP Port
Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swap-
ped
PoE: PoE Failure
4.16.2 E-Mail
쮿 Function name: Email/SMS Configuration
쮿 Function Description: Alarm configuration is used to configure the per-
sons who should receive the alarm message via email. It depends on your
settings. An email address has to be set in the web page of alarm confi-
guration. Then, user can read the trap information from the email. This
function provides 6 email addresses at most. The 22 different trap events
will be sent out to SNMP Manager when trap event occurs. After ticking
trap events, you can fill in your desired email addresses numbers. Then,
please click <Apply> button to complete the alarm configuration. It will
take effect in a few seconds.
쮿 Parameter Description: