System information

ManualsBrandsLancom Systems ManualsNetworkingLS61465

110533/0809

LANCOM Systems GmbH

Adenauerstr. 20/B2

52146 Würselen

Germany

E-Mail: info@lancom.eu

Internet www.lancom.eu

LANCOM ES-2126+

LANCOM ES-2126P

...connecting your business

110533_LC-ES2126-MANUAL_cover.in1 1110533_LC-ES2126-MANUAL_cover.in1 1 10.08.2009 12:42:3110.08.2009 12:42:31

Summary of content (244 pages)

PAGE 1
LANCOM Systems GmbH Adenauerstr. 20/B2 52146 Würselen Germany E-Mail: info@lancom.eu Internet www.lancom.eu . . . c o n n e c t i n g y o u r b u s i n e s s 110533/0809 LANCOM ES-2126+ LANCOM ES-2126P 110533_LC-ES2126-MANUAL_cover.in1 1 10.08.
PAGE 2
LANCOM ES-2126+ LANCOM ES-2126P
PAGE 3
© 2009 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from LANCOM Systems.
PAGE 4
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Preface Preface Thank you for your confidence in us! The LANCOM ES-2126+ switch features 24 Fast-Ethernet and two combo ports (TP/SFP), it integrates perfectly into LANCOM's Advanced Routing und Forwarding and it supports up to 256 active VLANs. It uses bandwidth control to prioritize the data traffic according to predefined criteria (e.g. voice data or certain ports). Furthermore the LANCOM ES-2126P switch supports Power-over-Ethernet for connected network devices.
PAGE 5
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Preface EN manual, or if you require any further support. The area 'Support' will help you with many answers to frequently asked questions (FAQs). Furthermore, the knowledgebase offers you a large reserve of information. The latest drivers, firmware, utilities and documentation are constantly available for download. In addition, LANCOM Support is available.
PAGE 6
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Contents Contents 9 1.1 Key Features in the Device 10 1.2 Just what can your LANCOM switch do? 12 2 Installation 14 2.1 Package content 14 2.2 System requirements 14 2.3 Status displays and interfaces 15 2.3.1 LEDs and buttons on the LANCOM ES-2126+ 15 2.3.2 LEDs and buttons on the LANCOM ES-2126P 16 2.3.3 Connectors on the LANCOM ES-2126+ and LANCOM ES2126P 18 2.4 Mounting and connecting up the LANCOM switch 18 2.5 Software installation 2.5.
PAGE 7
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Contents EN 4 Operation of Web- based Management 6 30 4.1 Web Management Home Overview 4.1.1 The Information of Page Layout 31 31 4.2 System 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 System Information IP Configuration Time Configuration Account Configuration Management Security Virtual Stack System Log 33 33 34 36 39 40 43 44 4.3 Port 4.3.1 4.3.2 4.3.3 4.3.4 Port Configuration Port Status Simple Counter Detail Counter 45 45 47 50 51 4.4 PoE 53 4.
PAGE 8
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Contents 98 4.16 Alarm Configuration 4.16.1 Events 4.16.2 E-Mail 102 102 103 4.17 Security 104 4.18 Bandwidth Management 106 4.19 QoS (Quality of Service) Configuration 109 4.20 Diagnostics 4.20.1 Diagnostics 4.20.2 Loopback 4.20.3 Ping 4.20.4 Watchdog 118 118 119 120 120 4.21 TFTP Server 121 4.22 Log 122 4.23 Firmware Upgrade 123 4.24 Reboot 124 4.25 Logout 125 5 Operation of CLI Management 126 5.1 CLI Management 5.1.1 Login 126 126 5.
PAGE 9
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Contents 8
PAGE 10
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 1: Introduction 1 Introduction The switch can be managed through RS-232 serial port via directly connection, or through Ethernet port using Telnet or WEBconfig. Additionally, the LANCOM ES-2126+ models can be managed via SSH (Secure Shell) or WEBconfig with SSL-encryption. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port’s activity in a friendly way.
PAGE 11
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 1: Introduction 1.1 Key Features in the Device 쮿 QoS: Support Quality of Service by the IEEE 802.1P standard. There are two priority queue and packet transmission schedule using Weighted Round Robin (WRR). User-defined weight classification of packet priority can be based on either VLAN tag on packets or user-defined port priority. EN 쮿 Spanning Tree: Support IEEE 802.1D, IEEE 802.1w (RSTP: Rapid Spanning Tree Protocol) standards.
PAGE 12
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 1: Introduction actions. TACACS+ is an alternative to other AAA protocols such as RADIUS. EN 쮿 IGMP Snooping: Support IGMP version 2 (RFC 2236): The function IGMP snooping is used to establish the multicast groups to forward the multicast packet to the member ports, and, in nature, avoid wasting the bandwidth while IP multicast packets are running over the network.
PAGE 13
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 1: Introduction 1.2 Just what can your LANCOM switch do? LANCOM ES2126+ LANCOM ES2126P EN Hardware Supports 24-port 10/100M TP ports with Nway and auto MDIX function ✔ ✔ 2 Gigabit dual media ports(TP/SFP) ✔ ✔ On-line pluggable fiber transceiver modules ✔ ✔ 256KB packet buffer and 128KB control memory ✔ ✔ Maximal packet length can be up to 1536 bytes ✔ ✔ Full-duplex flow control (IEEE802.
PAGE 14
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 1: Introduction LANCOM ES2126P 5 kinds of QoS, are as follows, MAC Priority, 802.1p Priority, IP TOS Priority, and DiffServ DSCP Priority. ✔ ✔ WEBconfig and CLI management over telnet ✔ ✔ WEBconfig with optional SSL-encryption and CLI management over SSH ✔ Rapid Spanning Tree (802.1w RSTP) ✔ ✔ 802.
PAGE 15
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation 2 Installation This chapter will assist you to quickly install hardware and software. First, check the package contents and system requirements. The device can be installed and configured quickly and easily if all prerequisites are fulfilled. EN 2.1 Package content Before beginning with the installation, please check that nothing is missing from your package.
PAGE 16
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation 2.3 Status displays and interfaces Meanings of the LEDs  2.3.1 Please be aware that LANmonitor shows far more information about the status of the LANCOM switch than the LEDs '→ Monitoring the LANCOM switch with LANmonitor'. LEDs and buttons on the LANCOM ES-2126+ Located on the front of the device are light-emitting diodes (LEDs) that provide information on device status, and also two buttons.
PAGE 17
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation Power LED: Constant green when power is supplied to the device. 쐏 ACT Constant green when the LED mode is set to "Active". 쐄 FDX Constant green when the LED mode is set to "Full-Duplex". 쐂 SPD Constant green when the LED mode is set to "Speed". 쐆 LEDSET Button to switch the LEDmode between -“Active”, “Full-Duplex” and “Speed”. 쐊 LINK Constant green when the network connection is established to the connected device.
PAGE 18
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 2: Installation 쐃 쐋 쐏 쐇 쐈 쐊 쐎 쐅 쐈 쐃 CPU RUN Blinks green if the CPU is running without problem. 쐇 PWR Power LED: Constant green when power is supplied to the device. 쐋 PoE-ACT Constant green when the device connected to this port is powered via PoE. 쐏 LINK Constant green when the network connection is established to the connected device. Off if no network connection can be established to the connected device.
PAGE 19
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation 쐆 FDX Constant green when the LED mode is set to "Full-Duplex". 쐊 SPD Constant green when the LED mode is set to "Speed". 쐎 LEDSET Button to switch the LEDmode between -“Active”, “Full-Duplex” and “Speed”. 쐅 Reset Button to re-start the system. 쐈 FX Constant green when the optical port is active. Off when the TP port is active. EN Port 25 and 26 2.3.
PAGE 20
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation If optical connections are to be used, additional modules can be purchased as accessories. 햴 Configuration via serial ports – In order to configure the LANCOM switch directly, connect the serial configuration cable (supplied) to the COM port of the device. Connect the other end of this cable to an available COM port (RS 232) on a PC.
PAGE 21
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 2: Installation EN In Setup, select Install software. The following selection menus will appear on screen: 2.5.2 Which software should I install? 쮿 LANconfig is the Windows configuration program for all LANCOM devices. LANconfig searches for all LANCOM devices in your network. You can use this to start the Web-based configuration of a LANCOM switch. 쮿 With LANmonitor you can use a Windows computer to monitor all of your LANCOM devices.
PAGE 22
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 3 Configuring and monitoring the LANCOM switch 3.1 Configuration options 쮿 By means of a graphical user interface or via a browser (WEBconfig). This option is only available if you have network access to the device's IP address from your computer. With a LANCOM ES-2126+ you can access WEBconfig via a encrypted connection over SSL as well.
PAGE 23
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch EN 쮿 If you do not have the device's IP number, LANconfig can be used to search for it. To start LANconfig click on Start 왘 Programs 왘 LANCOM 왘 LANconfig. LANconfig automatically searches for all available devices in your network. Any available LANCOM devices will be displayed in the list, including the LANCOM switch. Double-click on this entry to start the browser automatically with the correct IP address.
PAGE 24
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 3.1.2 Starting the Command Line Interface over the network If you know the device's IP address (see section above) and the LANCOM switch is accessible from your computer via the network, the you can use the command line interface via the network. 쐃 To do this, start a console such as Telnet and enter the device's IP address as the target. 3.1.3 EN 쐇 Log on with user name and password (default: admin, admin).
PAGE 25
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 쐋 Log on with user name and password (default: admin, admin). 3.2 Which configuration does the device use? The switch supports four different configurations: The start configuration, the current working configuration, the user configuration and the default configuration.
PAGE 26
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 왏 With the function "restore default configuration included default IP address" you can reset the switch to the factory default settings (including the administrator´s password and the auto DHCP setting). 왏 With the function “restore default configuration without changing current IP address” you can reset the switch to the factory default settings, but without changing the IP address.
PAGE 27
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch EN Here you can save the current configuration to the flash memory as a user configuration. 쮿 Restore default configuration (includes default IP address) Here you can reset the switch to its factory settings. The default configuration replaces the start configuration. The device is reset to Auto DHCP and it retrieves its IP address from a DHCP server in the network.
PAGE 28
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 왏 Export file path: Export start: You can export the start configuration from the flash memory. 왏 Import file path: Import start: You can import the start configuration to the flash memory here. Import user conf.: You can import the user configuration to the flash memory here. 3.
PAGE 29
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 왏 Gray: The port is deactivated in the configuration 왏 Yellow: The port is activated in the configuration 쮿 The right-hand icon shows the link state: 왏 Gray: No active network device is connected to the port 왏 Green: A network device is connected to the port and active EN Apart from the status, LANmonitor displays the VLAN ID for each port and the detected data rate at active ports connected to active network dev
PAGE 30
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 3: Configuring and monitoring the LANCOM switch PoE class Use Power range 0 default 0,44 W - 12.95 W 1 optional 0,44 W - 3.84 W 2 optional 3,84 W - 6.49 W 3 optional 6,49 W - 12.95 W 4 reserved 15,4 W EN Source Equipment (PSE) measures the power requirement of the device.
PAGE 31
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 4 Operation of Web-based Management EN This chapter instructs you how to configure and manage the PSES-2126C through the web user interface it supports, to access and manage the 24 10/ 100Mbps TP + 2 Gigabit dual media ports with TP/SFP Fiber management Ethernet switch.
PAGE 32
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management trator’s identity, can only monitor the system. There are only a maximum of three users able to login simultaneously in the switch. To optimize the display effect, we recommend you use Microsoft IE 6.0 above or current FireFox and have the resolution 1024x768. The switch supported neutral web browser interface. Web Management Home Overview After you login, the switch shows you the system information.
PAGE 33
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN information of a single port. When clicking the port on the front panel, an information window for the port will be pop out. The figure shows the basic information of the clicked port. With this, you’ll see the information about the port status, traffic status and bandwidth rating for egress and ingress respectively. On the left-top corner, there is a pull-down list for Auto Logout.
PAGE 34
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 4.2 4.2.1 System System Information 쮿 Function name: System Information 쮿 Function Description: Shows the basic system information. 쮿 Parameter Description: 왏 Model name: The model name of this device.
PAGE 35
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 System Description: As it is, this tells what this device is. Here, it is “24-Port 10/100BaseT/TX Managed PoE Switch”. 왏 Location: Basically, it is the location where this switch is put. Userdefined. 왏 Contact: For easily managing and maintaining device, you may write down the contact person and phone here for getting help soon. You can configure this parameter through the device’s user interface or SNMP.
PAGE 36
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: IP Configuration 쮿 Function Description: Set IP address, subnet mask, default gateway and DNS for the switch. 쮿 Parameter Description: 왏 DHCP Setting: DHCP is the abbreviation of Dynamic Host Configuration Protocol. Here DHCP means a switch to turn ON or OFF the function. The switch supports DHCP client used to get an IP address automatically if you set this function “Enable”.
PAGE 37
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN networks, hence, subnet mask is introduced to solve this problem. Subnet mask uses some bits from host address and makes an IP address looked Network address, Subnet mask number and host address.
PAGE 38
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: Time 쮿 Function Description: Set the system time by manual input or set it by syncing from Time servers. The function also supports daylight saving for different area’s time adjustment. 쮿 Parameter Description: 왏 Current Time: Shows the current time of the system. 왏 Manual: This is the function to adjust the time manually.
PAGE 39
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN time since it passed over. And when the time passes over the ending time, the system time will be decreased one hour after one minute at the time since it passed over. The switch supports valid configurable day light saving time is –5 ~ +5 step one hour. The zero for this parameter means it need not have to adjust current time, equivalent to in-act daylight saving. You don’t have to set the starting/ending date as well.
PAGE 40
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Hour: Range is 0 ~ 23. EN Default: 0 4.2.4 Account Configuration In this function, only administrator can create, modify or delete the username and password. Administrator can modify other guest identities’ password without confirming the password but it is necessary to modify the administratorequivalent identity. Guest-equivalent identity can modify his password only.
PAGE 41
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Password: guest 4.2.5 Management Security Through the management security configuration, the manager can do the strict setup to control the switch and limit the user to access this switch. The following rules are offered for the manager to manage the switch: 쐃 When no lists exists, then it will accept all connections.
PAGE 42
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쐏 When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range. 쐄 When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range and NOT inside of the denying range at the same time.
PAGE 43
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 Name: A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8 characters. 왏 VID: The switch supports two kinds of options for managed valid VLAN VID, including “Any” and “Custom”. Default is “Any”. When you choose “Custom”, you can fill in VID number. The valid VID range is 1~4094.
PAGE 44
LANCOM ES-2126+ und LANCOM ES-2126P while you select “Accept” action, you will have the authority to manage the switch. 왏 Edit/Create: A new entry of Management Security Configuration can be created after the parameters as mentioned above had been setup and then press button. Of course, the existed entry also can be modified by pressing this button. 왏 Delete: Remove the existed entry of Management Security Configuration from the management security table. 4.2.
PAGE 45
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN configure more than two devices as Master device, however, the Master device with the smaller MAC value will be the Master one. All of these 16 devices can become Master device and back up with each other . 쮿 Parameter Description: 왏 State: It is used for the activation or de-activation of VSM. Default is Enable. 왏 Role: The role that the switch would like to play in virtual stack.
PAGE 46
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 No: Display the order number that the trap happened. Time: Display the time that the trap happened. EN 왏 Desc: Displays a description event recorded in the System Log. 왏 Clear: Clear log data. 4.3 Port Four functions, including Port Status, Port Configuration, Simple Counter and Detail Counter are contained in this function folder for port monitor and management.
PAGE 47
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: It is used to set each port’s operation mode. The switch supports 3 parameters for each port. They are State, Speed/Duplex and Flow Control. 쮿 Parameter Description: 왏 State: Set the communication capability of the port is Enabled or Disabled. When enabled, traffic can be transmitted and received via this port.
PAGE 48
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Port Status The function Port Status gathers the information of all ports’ current status and reports it by the order of port number, media, link status, port state, AutoNegotiation status, speed/duplex, Rx Pause and Tx Pause. An extra media type information for the module ports 25 and 26 is also offered. EN 4.3.
PAGE 49
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 State: Show that the communication function of the port is “Enabled” or “Disabled”. When it is enabled, traffic can be transmitted and received via this port. When it is disabled, no traffic can be transferred through this port. Port State is configured by user. Default: Enabled. EN 왏 Auto Nego.: Show the exchange mode of Ethernet MAC. There are two modes supported in the switch.
PAGE 50
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN Default: None. 쮿 Parameter description of Port 25 and Port 26: 왏 Connector Type: Display the connector type, for instance, UTP, SC, ST, LC and so on. 왏 Fiber Type: Display the fiber mode, for instance, Multi-Mode, SingleMode. 왏 Tx Central Wavelength: Display the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm, 1550nm and so on.
PAGE 51
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Mon1(Bias) mA: Show the Bias current of module. 왏 Mon2(TX PWR): Show the transmit power of module. 왏 Mon3(RX PWR): Show the receiver power of module. 4.3.3 Simple Counter EN The function of Simple Counter collects any information and provides the counting about the traffic of the port, no matter the packet is good or bad. In the following figure, the window can show all ports’ counter information at the same time.
PAGE 52
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Detail Counter The function of Detail Counter collects any information and provides the counting about the traffic of the port, no matter the packet is good or bad. In the following figure the window can show only one port counter information at the same time. To see another port’s counter, you have to pull down the list of Select, then you will see the figures displayed about the port you had chosen.
PAGE 53
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Rx Multicast Packets: Show the counting number of the received multicast packet. 왏 Rx Pause Packets: Show the counting number of the received pause packet. 왏 Tx Collisions: Number of collisions transmitting frames experienced. 왏 Tx Single Collision: Number of frames transmitted that experienced exactly one collision. 왏 Tx Multiple Collision: Number of frames transmitted that experienced more than one collision.
PAGE 54
LANCOM ES-2126+ und LANCOM ES-2126P 왏 Tx Pause Packets: Show the counting number of the transmitted pause packet. 왏 Rx FCS Errors: Number of bad FSC packets received. 왏 Rx Alignment Errors: Number of Alignment errors packets received. 왏 Rx Fragments: Number of short frames (< 64 bytes) with invalid CRC. 왏 Rx Jabbers: Number of long frames(according tomax_length register) with invalid CRC. 왏 Rx Drop Packets: Frames dropped due to the lack of receiving buffer.
PAGE 55
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Port No: Port number. 왏 Port On: Shows whether the port is supplying the power to the PD or not. 왏 AC Disconnect Port Off: Port is turned off due to the AC Disconnect function. 왏 DC Disconnect Port Off: Port is turned off due to the DC Disconnect function.
PAGE 56
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN once the power required by the PD excesses the Class, Short Circuit or over temperature occurs. 쮿 Parameter Description: 왏 Status: Include “Normal” or “Active” two kinds of status. The former means the port is ready to link and supply the power to the PD at any time. The latter means the port is in the condition of supplying the power.
PAGE 57
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Class: The Class of the PD linked to the port of the switch. 4.5 Loop Detection EN The loop detection is used to detect the presence of traffic. When switch receives packet's(looping detection frame) MAC address the same as oneself from port, show Loop detection happens. The port will be locked when it received the looping detection frames.
PAGE 58
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: SNMP Configuration 쮿 Function Description: This function is used to configure SNMP settings, community name, trap host and public traps as well as the throttle of SNMP. A SNMP manager must pass the authentication by identifying both community names, then it can access the MIB information of the target device. So, both parties must have the same community name.
PAGE 59
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Default trap host IP address: 0.0.0.0 Default port number :162 EN 왏 Trap: In the switch, there are 6 trap hosts supported. Each of them has its own community name and IP address; is user-definable. To set up a trap host means to create a trap manager by assigning an IP address to host the trap message.
PAGE 60
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management The switch supports a random delay time for DHCP and boot delay for each device. This suppresses the broadcast storm while all devices are at booting stage in the same time. The maximum user-defined delay time is 30 sec. If DHCP Broadcasting Suppression function is enabled, the delay time is set randomly, ranging from 0 to 30 seconds, because the exactly delay time is computed by the switch itself. The default is “Disable”.
PAGE 61
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN The packets will be discarded by the IGMP Snooping if the user transmits multicast packets to the multicast group that had not been built up in advance. 쮿 Function name: IGMP Snooping Status 쮿 Function Description: IGMP is used to snoop the status of IP multicast groups and display its associated information in both tagged VLAN and non-tagged VLAN networks.
PAGE 62
LANCOM ES-2126+ und LANCOM ES-2126P 왏 VLAN ID: Shows VLAN ID for each multicast group. 왏 Member Port: Shows member ports that join each multicast group. Member port may be only or more than one. 쮿 Function name: Allowed Group 쮿 Function Description: The Allowed Group function allows the IGMP Snooping to set up the IP multicast table based on user’s specific conditions. IGMP report packets that meet the items you set up will be joined or formed the multicast group.
PAGE 63
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Edit: The existed entry also can be modified after pressing button. 왏 Delete: Remove the existed entry of allowed group configuration from the allowed group. 4.9 VLAN EN The switch supports Tag-based VLAN (802.1q) and Port-based VLAN. Support 256 active VLANs and VLAN ID 1~4094. VLAN configuration is used to partition your LAN into small ones as your demand.
PAGE 64
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Symmetric Vlan: This is a Ingress Rule (Rule 1, The Ingress Filtering Rule 1 is “forward only packets with VID matching this port’s configured VID”.). For example, if port 1 receives a tagged packet with VID=100 (VLAN name=VLAN100), and if Symmetric-Vlan function is enabled, the switch will check if port 1 is a member of VLAN100. If yes, the received packet is forwarded; otherwise, the received packet is dropped.
PAGE 65
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 4.9.2 Tag-based Group EN 쮿 Function name: Tag-based Group Configuration 쮿 Function Description: It shows the information of existed Tag-based VLAN Groups. You can also easily create, edit and delete a Tag-based VLAN group by pressing , and function buttons. User can add a new VLAN group by inputting a new VLAN name and VLAN ID after pressing button.
PAGE 66
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN will be untagged. Finally, press the button to have the setting taken effect. 왏 Delete Group: Just press the button to remove the selected group entry from the Tag-based group table. 왏 Edit a group: ust select a group entry and press the button, then you can modify a group’s description, member and untag settings.
PAGE 67
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 4.9.3 PVID EN 쮿 Function name: PVID 쮿 Function Description: In PVID Setting, user can input VID number to each port. The range of VID number is from 1 to 4094. User also can choose ingress filtering rule (Rule 2) to each port. The Ingress Filtering Rule 2 is “drop untagged frame”. While Rule 2 is enabled, the port will discard all Untagged-frames. 쮿 Parameter Description: 왏 Port 1-26: Port number.
PAGE 68
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management If the former is the case, then the packets with tagged or untagged will be processed. If the later is the case, only the packets carrying VLAN tag will be processed, the rest packets will be discarded. Port-based Group 쮿 Function name: Port-based Group Configuration 쮿 Function Description: It shows the information of the existed Port-based VLAN Groups.
PAGE 69
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 왏 Delete Group: Just press the button to remove the selected group entry from the Port-based group table. 왏 Edit a group: Just select a group entry and press the button, then you can modify a group‘s description and member set. 4.
PAGE 70
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 MAC: Display the MAC address of one entry you selected from the searched MAC entries table. 왏 Alias: Set up the Alias for the selected MAC entry. 왏 Set Alias: Save the Alias of MAC entry you set up. 왏 Search: Find the entry that meets your setup. 왏 Previous Page: Move to the previous page. 왏 Next Page: Move to the next page. 왏 Alias: The Alias of the searched entry. 왏 MAC Address:The MAC address of the searched entry.
PAGE 71
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Aging Time: Delete a MAC address idling for a period of time from the MAC Table, which will not affect static MAC address. Range of MAC Address Aging Time is 10-1000000 seconds. The default Aging Time is 300 seconds. 왏 Learning Limit: To set up the maximum amount of MAC that each port can learn. Valid value of learning limit for port 1~24 ranges from 08191.
PAGE 72
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Parameter Description: 왏 MAC: It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by hyphens. For example, 왏 00 – 40 - C7 - D6 – 00 - 01 왏 VID: VLAN identifier. This will be filled only when tagged VLAN is applied. Valid range is 1 ~ 4094. 왏 Queue (Priority): Set up the priority( 0~3) for the MAC.
PAGE 73
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function name: MAC Alias Create/Edit or Delete 쮿 Function Description: In the MAC Alias function, MAC Alias Add/Edit function is used to let you add or modify an association between MAC address and a plain English name. User can click button to add a new record with name. As to MAC Alias Delete function is used to let you remove an alias name to a MAC address.
PAGE 74
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN In GVRP Configuration function folder, there are three functions supported, including GVRP Config, GVRP Counter and GVRP Group explained below. 쮿 Function name: GVRP Config 쮿 Function Description: In the function of GVRP Config, it is used to configure each port’s GVRP operation mode, in which there are seven parameters needed to be configured described below.
PAGE 75
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Default Applicant Mode: The mode here means the type of participant. There are two modes, normal participant and non-participant, provided for the user’s choice. 왏 Normal: It is Normal Participant. In this mode, the switch participates normally in GARP protocol exchanges. The default setting is Normal. 왏 Non-Participant: It is Non-Participant. In this mode, the switch does not send or reply any GARP messages.
PAGE 76
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: All GVRP counters are mainly divided into Received and Transmitted two categories to let you monitor the GVRP actions. Actually, they are GARP packets. 쮿 Parameter Description: 왏 Received: Total GVRP Packets: Total GVRP BPDU is received by the GVRP application. Invalid GVRP Packets: Number of invalid GARP BPDU is received by the GARP application.
PAGE 77
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Transmitted: Total GVRP Packets: Total GARP BPDU is transmitted by the GVRP application. Invalid GVRP Packets: Number of invalid GARP BPDU is transmitted by the GVRP application. EN LeaveAll Message Packets: Number of GARP BPDU with Leave All message is transmitted by the GARP application. JoinEmpty Message Packets: Number of GARP BPDU with Join Empty message is transmitted by the GARP application.
PAGE 78
LANCOM ES-2126+ und LANCOM ES-2126P 4.12 EN 쮿 Chapter 4: Operation of Web- based Management STP Configuration The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding loops in switched networks. When STP is enabled, ensure that only one path is active between any two nodes on the network at a time. User can enable Spanning Tree Protocol on switch’s web management and then set up other advanced items.
PAGE 79
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Current Max. Age: Show the current root bridge maximum age time. Maximum age time is used to monitor if STP topology needs to change. When a bridge does not receive a hello message from root bridge until the maximum age time is counted down to 0, the bridge will treat the root bridge malfunctioned and issue a Topology Change Notification (TCN) BPDU to all other bridges.
PAGE 80
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management STP Configuration The STP, Spanning Tree Protocol, actually includes RSTP. In the Spanning Tree Configuration, there are six parameters open for the user to configure as user’s idea. Each parameter description is listed below.
PAGE 81
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management from Learning state moved to Forwarding state of a port in bridge. The forward delay time contains two states, Listening state to Learning state and Learning state to Forwarding state. It assumes that forward delay time is 15 seconds, then total forward delay time will be 30 seconds. This has much to do with the STP convergent time which will be more than 30 seconds because some other factors.
PAGE 82
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Notice: Three other states (Disable state, BLOCKING state and LISTENING state) defined in the 802.1d specification are now all represented as DISCARDING state. LEARNING state indicates this port can now contribute its learning knowledge but cannot forward packets still. FORWARDING state indicates this port can both contribute its learning knowledge and forward packets normally.
PAGE 83
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN Edge Ports will immediately transit to forwarding state and skip the listening and learning state because the edge ports cannot create bridging loops in the network. This will expedite the convergence. When the link on the edge port toggles, the STP topology keeps unchanged. Unlike the designate port or root port though, an edge port will transit to a normal spanning-tree port immediately if it receives a BPDU.
PAGE 84
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN ration is to make the port quickly get back to act as an RSTP port. Click button to send a RSTP BPDU from the port you specified. 4.13 Trunking Configuration The Port Trunking Configuration is used to configure the settings of Link Aggregation.
PAGE 85
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management The switch LACP does not support the followings: Link Aggregation across switches Aggregation with non-IEEE 802.3 MAC link Operating in half-duplex mode Aggregate the ports with different data rates EN 쐇 Static Trunk: Ports using Static Trunk as their trunk method can choose their unique Static GroupID (also 1~3, this Static groupID can be the same with another LACP groupID) to form a logic “trunked port”.
PAGE 86
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management LACP: A port use LACP as its trunk method to get aggregated with other ports also using LACP. Static: A port use Static Trunk as its trunk method to get aggregated with other ports also using Static Trunk. 왏 Group: Ports choosing the same trunking method other than “None” must be assigned a unique Group number (i.e. Group ID, valid value is from 1 to 8) in order to declare that they wish to aggregate with each other.
PAGE 87
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: Aggregator View 쮿 Function Description: To display the current port trunking information from the aggregator point of view. 쮿 Parameter Description: 왏 Aggregator: It shows the aggregator ID (from 1 to 26) of every port. In fact, every port is also an aggregator, and its own aggregator ID is the same as its own Port No.. 왏 Method: Show the method a port uses to aggregate with other ports.
PAGE 88
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Function name: LACP Detail (LACP Aggregator Detailed Information) 쮿 Function Description: Show the detailed information of the LACP trunking group. 쮿 Parameter Description: 왏 Actor: The switch you are watching on. 왏 Partner: The peer system from this aggregator’s view. 왏 System Priority: Show the System Priority part of a system ID. 왏 MAC Address: Show the MAC Address part of a system ID. 왏 Port: Show the port number part of an LACP port ID.
PAGE 89
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN Default: DA and SA. 4.14 802.1x Configuration 802.1x port-based network access control provides a method to restrict users to access network resources via authenticating user’s information. This restricts users from gaining access to the network resources through a 802.1xenabled port without authentication. If a user wishes to touch the network through a port under 802.
PAGE 90
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management A port acting as an authenticator is thought to be two logical ports, a controlled port and an uncontrolled port. A controlled port can only pass the packets when the authenticator PAE is authorized, and otherwise, an uncontrolled port will unconditionally pass the packets with PAE group MAC address, which has the value of 01-80-c2-00-00-03 and will not be forwarded by MAC bridge, at any time.
PAGE 91
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN Supplicant PAE. In this case, PC A wants to access the services on device B and C, first, it must exchange the authentication message with the authenticator on the port it connected via EAPOL packet. The authenticator transfers the supplicant’s credentials to Authentication server for verification. If success, the authentication server will notice the authenticator the grant.
PAGE 92
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 쐄 And next, the Supplicant replies an EAP-Response/Identity to the authenticator. The authenticator will embed the user ID into Radius-AccessRequest command and send it to the authentication server for confirming its identity.
PAGE 93
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management Only MultiHost 802.1X is the type of authentication supported in the switch. In this mode, for the devices connected to this port, once a supplicant is authorized, the devices connected to this port can access the network resource through this port. 802.
PAGE 94
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Port Number: The port number to communicate with RADIUS server for the authentication service. The valid value ranges 1-65535. Default port number is 1812. 왏 Secret Key: The secret key between authentication server and authenticator. It is a string with the length 1 – 31 characters. The character string may contain upper case, lower case and 0-9. It is character sense.
PAGE 95
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 802.1x Mode: 802.1x operation mode. There are two options, including Disable and Multi-host mode. Default is Disable. Disable: It will have the chosen port acting as a plain port, that is no 802.1x port access control works on the port. 802.
PAGE 96
LANCOM ES-2126+ und LANCOM ES-2126P of 802.1X authenticator. The Port Status will show the following screen. 왏 Port Number:The port number to be chosen to show its 802.1X Port Status. The valid number is Port 1 – 26. 왏 Port Status: The current 802.1X status of the port. In Disable mode, this field is Disabled. 왏 802.1x with Multihost mode: When selecting 802.1x with Multihost mode for a port in the function 802.
PAGE 97
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Period, reAuthEnabled, reAuthPeriod, max. Request, suppTimeout, serverTimeout and Controlled direction. 왏 Port Control: This is used to set the operation mode of authorization. There are three type of operation mode supported, ForceUnauthorized, ForceAuthorized, Auto. ForceUnauthorized: EN The controlled port is forced to hold in the unauthorized state.
PAGE 98
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 serverTimeout(1-65535 s): A timeout condition in the exchange between the authenticator and the authentication server. The valid range: 1 –65535. Default: 30 seconds 4.15 4.15.1 For LANCOM ES2126+ only TACACS+ Introduction TACACS+ (Terminal Access Controller Access-Control System) is a protocol for authentication, authorization and accounting (AAA).
PAGE 99
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management consistent on all devices or for all services. For this reason, user data should be managed on a central server. EN As a simple example, a user wishes to register at a router and sends the corresponding login details (user ID) to it.
PAGE 100
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Authentication The device for configuration can be accessed via the serial interface (console), via the LAN with Telnet or SSH, or with a browser. Access authentication for each of these three access methods can be individually set up either to refer to the user accounts in the device itself, or to the the user accounts on the TACACS+ server. A second login option can be defined in case access authentication fails several times for the selected user account.
PAGE 101
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Authorization 왏 State: Activates authorization via TACACS+ server. If TACACS+ authorization is activated, all authorization data is transmitted via TACACS+ protocol to the configured TACACS+ server.
PAGE 102
LANCOM ES-2126+ und LANCOM ES-2126P 왏 QoS 왏 Reboot 왏 Security 왏 SNMP 왏 STP 왏 System 왏 TACACS+ 왏 TFTP 왏 Time 왏 Trunk 왏 VLAN 왏 Virtual Stack. The arguments “show” and “set” can be permitted or restricted separately for each command.   For the admin account all undefined commands must be permitted, e.g. using the "Permit Unmatched Commands" and "Permit Unmatched Args" options in the TACACS+ server configuration. TACACS+ authorization will only activate if the defined TACACS+ server is available.
PAGE 103
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 쮿 Accounting 왏 State: Activates accounting via TACACS+ server. If TACACS+ accounting is activated, all accounting data is transmitted via TACACS+ protocol to the configured TACACS+ server. TACACS+ accounting will only activate if the defined TACACS+ server is available.
PAGE 104
LANCOM ES-2126+ und LANCOM ES-2126P 왏 LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP Port Failure 왏 GVRP: GVRP Disabled, GVRP Enabled 왏 VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled 왏 Module Swap: Module Inserted, Module Removed, Dual Media Swapped 왏 PoE: PoE Failure 4.16.2 E-Mail 쮿 Function name: Email/SMS Configuration 쮿 Function Description: Alarm configuration is used to configure the persons who should receive the alarm message via email. It depends on your settings.
PAGE 105
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Email: Mail Server: the IP address of the server transferring your email. Username: your username on the mail server. Password: your password on the mail server. EN Email Address 1 – 6: email address that would like to receive the alarm message. 4.17 Security 쮿 Function name: Mirror Configuration 쮿Function Description: Mirror Configuration is to monitor the traffic of the network.
PAGE 106
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN Function name: 쮿 Function name: Isolated Group 쮿 Function Description: Isolated Group function can let the port be independent of other ports in the Isolated group, and the communication is also forbidden between these ports. But, the ports of the Isolated group are still able to communicate with the ports of the non-Isolated group.
PAGE 107
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: The function of the Restricted Group can decide the direction of transmitting packets for the specific port. The packets received by the port with the “Ingress” mode of Restricted Group will be sent to the ports with the “Egress” mode of Restricted Group. 쮿 Parameter Description: 왏 Mode: Used for the activation or de-activation of Restricted Group function. Default is disable.
PAGE 108
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: Ingress Bandwidth Setting function is used to set up the limit of Ingress bandwidth for each port. 쮿 Parameter Description: 왏 Port No.: Choose the port that you would like this function to work on it. Valid range of the port is 1~26. 왏 Rate: Set up the limit of Ingress bandwidth for the port you choose.
PAGE 109
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: Egress Bandwidth Setting function is used to set up the limit of Egress bandwidth for each port. 쮿 Parameter Description: 왏 Port No.: Choose the port that you would like this function to work on it. Valid range of the port is 1~26. 왏 Rate: Set up the limit of Egress bandwidth for the port you choose. Packet transmission will be delayed if the rate exceeds the value you set up in Data Rate field.
PAGE 110
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 Storm Type: Disable: Disable the function of the bandwidth storm control. Broadcast Storm Control: Enable the function of bandwidth storm control for broadcast packets. Multicast Storm Control: Enable the function of bandwidth storm control for multicast packets. Unknown Unicast Storm Control: Enable the function of bandwidth storm control for unknown unicast packets.
PAGE 111
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management bit SERVICE TYPE field that specifies how the datagram should be handled. The field could be divided into six subfields as follows, PRECEDENCE (3 bits), D-Type (Delay Priority, 1 bit ), T-Type (Throughput Priority, 1bit), R-Type (Reliability Priority, 1bit ), M-Type (Monetary Cost Priority, 1bit ), and UNUSED (1bit ). EN User can randomly control these fields to achieve some special QoS goals.
PAGE 112
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 쐇 enable both VIP and DSCP Choose priorities of VIP and DSCP. 쐋 enable both TOS and DSCP Choose "DSCP". EN 쐏 enable both VIP and DSCP Choose priorities of VIP and DSCP. 쐄 enable both 802.1p and TOS Choose "TOS". 쐂 enable both 802.1p and DSCP Choose "DSCP". 쐆 enable both 802.1p and DSCP and TOS Choose "DSCP". 쐊 enable both 802.1p and DSCP and TOS and VIP Choose priorities of VIP and DSCP. VIP/DSCP > TOS > 802.
PAGE 113
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Weight (1~55): Over here, you can make an arrangement to Weight values of Queue 0 to Queue 3. The range of Weight you can set is 1~55. In default, the weight of Queue 0 is 1, the weight of Queue 1 is 2, the weight of Queue 2 is 4, and the weight of Queue 3 is 8.
PAGE 114
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Function name: 802.1p Setting 쮿 Function Description: This function will affect the priority of VLAN tag. Based on priority of VLAN tag, it can arrange 0~8 priorities, priorities can map to 4 queues of the switch (queue 0~3) and possess different bandwidth distribution according to your weight setting. 쮿 Parameter Description: 왏 802.1p Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3.
PAGE 115
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Delay Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3.
PAGE 116
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Throughput Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3.
PAGE 117
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Reliability Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3.
PAGE 118
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Monetary Cost Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3.
PAGE 119
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Parameter Description: 왏 DSCP Priority Mapping: 64 kinds of priority traffic as mentioned above, user can set up any of Queue 0~3. In default, Priority 0~15 are mapping to Queue 0, Priority 16~31 are mapping to Queue 1, Priority 32~47 are mapping to Queue 0, Priority 48~63 are mapping to Queue 0. 4.
PAGE 120
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Loopback 쮿 Function name: Loopback Test 쮿 Function Description: In the Loopback Test function, there are two different loopback tests. One is Internal Loopback Test and the other is External Loopback Test. The former test function will not send the test signal outside the switch box. The test signal only wraps around in the switch box. As to the latter test function, it will send the test signal to its link partner.
PAGE 121
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 4.20.3 Ping EN 쮿 Function name: Ping Test 쮿 Function Description: Ping Test function is a tool for detecting if the target device is alive or not through ICMP protocol which abounds with report messages. The switch provides Ping Test function to let you know that if the target device is available or not. You can simply fill in a known IP address and then click button.
PAGE 122
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Time Gap: To support the time gap for ping test. 왏 Reset the management CPU Interface: When ping failure time reach configured value then switch will reset the managed switch's CPU interface. Default state is disable. Fail Count: Default Ping Failed Count= 10, Range for Setting: 1~20 왏 Reboot the system: When ping failure time reach configured value then switch will reboot automatically. Default state is disable.
PAGE 123
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Parameter Description: Specify the IP address where the TFTP server locates. Fill in the IP address of your TFTP server, then press button to have the setting taken effect. 4.22 Log This function shows the log data. The switch provides system log data for users. There are 17 private trap logs, 5 public trap logs. The switch supports total 120 log entries.
PAGE 124
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management 왏 Events:Display the trap event name. 왏 Auto Upload Enable: Switch the enabled or disabled status of the auto upload function. 왏 Upload Log: Upload log data through tftp. 왏 Clear Log: Clear log data. Firmware Upgrade EN 4.23 Software upgrade tool is used to help upgrade the software function in order to fix or improve the function. The switch provides a TFTP client for software upgrade.
PAGE 125
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management EN 왏 Path and Filename: File path and filename stored the image file you want to upgrade. 4.24 Reboot We offer you many ways to reboot the switch, including power up, hardware reset and software reset. You can press the RESET button in the front panel to reset the switch.
PAGE 126
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 4: Operation of Web- based Management Logout You can manually logout by performing Logout function. In the switch, it provides another way to logout. You can configure it to logout automatically. 쮿 Function name: Logout 쮿 Function Description: The switch allows you to logout the system to prevent other users from the system without the permission. If you do not logout and exit the browser, the switch will automatically have you logout.
PAGE 127
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 5 Operation of CLI Management 5.1 CLI Management Refer to Chapter 2 for basic installation. The following description is the brief of the network connection. EN -- Locate the correct DB-9 null modem cable with female DB-9 connector. Null modem cable comes with the management switch. Refer to the Appendix B for null modem cable configuration.
PAGE 128
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 5: Operation of CLI Management Fig. 4-1 Fig. 4-2 5.2 Commands of CLI Fig.
PAGE 129
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 5.2.1 Global Commands of CLI 쮿 end 왏 Syntax: end EN 왏 Description: Back to the top mode. When you enter this command, your current position would move to the top mode. If you use this command in the top mode, you are still in the position of the top mode. 왏 Argument: None. 왏 Possible value: None.
PAGE 130
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(trunk)# exit PSES-2126C# 쮿 help 왏 Syntax: help EN 왏 Description: To show available commands. Some commands are the combination of more than two words. When you enter this command, the CLI would show the complete commands. Besides, the command would help you classify the commands between the local commands and the global ones. 왏 Argument: None. 왏 Possible value: None.
PAGE 131
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management logout Logout the system save start Save as start config save user Save as user config restore default Restore default config restore user Restore user config EN PSES-2126C(ip)# 쮿 history 왏 Syntax: history [#] 왏 Description: To show a list of previous commands that you had ever run. When you enter this command, the CLI would show a list of commands which you had typed before. The CLI supports up to 256 records.
PAGE 132
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 9. events 10. end 11. ip 12. help 13. history EN PSES-2126C(ip)# history 3 Command history: 12. help 13. history 14. history 3 PSES-2126C(ip)# 쮿 logout 왏 Syntax: logout 왏 Description: When you enter this command via Telnet connection, you would logout the system and disconnect.
PAGE 133
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management choose N or n, the IP address will keep the same one that you had saved before. EN If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately; otherwise, it would be back to the CLI system. After restoring default configuration, all the changes in the startup configuration would be lost.
PAGE 134
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Restoring ... Restore User Configuration Successfully Press any key to reboot system. 왏 Description: To save the current configuration as the start one. When you enter this command, the CLI would save your current configuration into the nonvolatile FLASH. If you want the configuration still works after rebooting, save the configuration using the command ‘save start’. 왏 Argument: None. 왏 Possible value: None.
PAGE 135
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Saving user... Save Successfully PSES-2126C# 5.2.2 Local Commands of CLI EN Please note: to use one of the local commands, you first have to change to the corresponding configuration area, e.g. 802.1x set mode 1. 802.
PAGE 136
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 1:set 802.1x to Multi-host mode 왏 Possible value: : 1 to 26 : 0 or 1 EN 왏 Example: PSES-2126C(802.1x)# set mode 2 1 쮿 set port- control 왏 Syntax: set port-control 왏 Description: To set up 802.1X status of each port.
PAGE 137
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : 1 to 26 : 0-65535, default is 60 왏 Example: PSES-2126C(802.1x)# set quiet-period 2 30 EN 쮿 set reAuthEnabled 왏 Syntax: set reAuthEnabled 왏 Description: A constant that define whether regular reauthentication will take place on this port.
PAGE 138
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: PSES-2126C(802.1x)# set reAuthMax 2 2 왏 Description: A constant that defines a nonzero number of seconds between periodic reauthentication of the supplicant. 왏 Argument: : syntax 1,5-7, available from 1 to 26 : timer, range 1-65535 왏 Possible value: : 1 to 26 : 1-65535, default is 3600 왏 Example: PSES-2126C(802.
PAGE 139
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set state 왏 Syntax: set state 왏 Description: To configure the settings related with 802.1X Radius Server. EN 왏 Argument: : the IP address of Radius Server, and the IP format is xxx.xxx.xxx.
PAGE 140
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set txPeriod 왏 Syntax: set txPeriod 왏 Description: A timer used by the Authenticator PAE state machine to determine when an EAPOL PDU is to be transmitted. EN 왏 Argument: : syntax 1,5-7, available from 1 to 26 : timer, range 1-65535 왏 Possible value: : 1 to 26 : 1-65535, default is 30 왏 Example: PSES-2126C(802.
PAGE 141
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 6 Disable 쮿 show parameter 왏 Syntax: show parameter 왏 Description: To display the parameter settings of each port. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(802.1x)# show parameter port 1) port control : Auto reAuthMax : 2 txPeriod : 30 Quiet Period : 60 reAuthEnabled : ON reAuthPeriod : 3600 max.
PAGE 142
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(802.1x)# show security Port Mode Status ====== ============ ============== Disable 2 Multi-host 3 Disable 4 Disable 5 Disable 6 Disable Unauthorized EN 1 쮿 show state 왏 Syntax: show state 왏 Description: To display the Radius server configuration. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(802.1x)# show state Radius Server: 192.168.1.
PAGE 143
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : new account name 왏 Possible value: : A string must be at least 5 character. 왏 Example: PSES-2126C(account)# add aaaaa EN Password: Confirm Password: PSES-2126C(account)# 쮿 del 왏 Syntax: del 왏 Description: To delete an existing account. 왏 Argument: : existing user account 왏 Possible value: None.
PAGE 144
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Current username (aaaaa):bbbbb New password: Confirm password: Username changed successfully. Password changed successfully. EN 쮿 show 왏 Syntax: show 왏 Description: To show system account, including account name and identity. 왏 Argument: None. 왏 Possible value: None.
PAGE 145
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management <#>: 1 to 6 왏 Example: PSES-2126C(alarm-email)# del mail-address 2 쮿 del server-user 왏 Syntax: del server-user EN 왏 Description: To remove the server, user account and password. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(alarm-email)# del server-user 쮿 set mail-address 왏 Syntax: set mail-address <#> 왏 Description: To set up the email address.
PAGE 146
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: :email server ip address or domain name 왏 Possible value: None. 왏 Example: PSES-2126C(alarm-email)# set server 192.168.1.6 EN 쮿 set user 왏 Syntax: set user 왏 Description: To set up the account of the email server. 왏 Argument: : email server account 왏 Possible value: None.
PAGE 147
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Email Address 2: Email Address 3: Email Address 4: Email Address 5: Email Address 6: EN <> 쮿 del all 왏 Syntax: del all 왏 Description: To disable email, sms and trap of events.
PAGE 148
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To disable the sms of the events. 왏 Argument: :del the range of sms, syntax 1,5-7 왏 Possible value: : 1~22 EN 왏 Example: PSES-2126C(alarm-events)# del sms 1-3 쮿 del trap 왏 Syntax: del trap 왏 Description: To disable the trap of the events.
PAGE 149
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To enable the email of the events. 왏 Argument: :set the range of email, syntax 1,5-7 왏 Possible value: : 1~22 EN 왏 Example: PSES-2126C(alarm-events)# set email 1-3 쮿 set sms 왏 Syntax: set sms 왏 Description: To enable the sms of the events.
PAGE 150
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management show 왏 Description: The Show here is used to display the configuration of alarm event. 왏 Argument: None. EN 왏 Possible value: None.
PAGE 151
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 20 Module Removed 21 Moudle Media Swapped 22 PoE Failure EN 쮿 show (alarm) 왏 Syntax: show 왏 Description: The Show for alarm here is used to display the configuration of Trap, SMS or E-mail. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(alarm)# show email PSES-2126C(alarm)# show events PSES-2126C(alarm)# show sms <> 쮿 del phone-number 왏 Syntax: del phone-number <#> 왏 Description: To delete sms phone number.
PAGE 152
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To delete sms server, user account and password. 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(alarm-sms)# del server-user 쮿 set phone- number 왏 Syntax: set phone-number <#> 왏 Description: To add sms phone number.
PAGE 153
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set user 왏 Syntax: set user 왏 Description: To set up user account and password of sms server. EN 왏 Argument: : SMS server account 왏 Possible value: None. 왏 Example: PSES-2126C(alarm-sms)# set user ABC 쮿 show 왏 Syntax: show 왏 Description: To display the configuration of SMS trap event. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(alarm-sms)# show SMS Server : 192.168.1.
PAGE 154
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management autologout 쮿 autologout 왏 Syntax: autologout 왏 Argument: : range 1 to 3600 seconds, 0 for autologout off, current setting is 180 seconds. 왏 Possible value: : 0,1-3600 왏 Example: PSES-2126C# autologout 3600 Set autologout time to 3600 seconds bandwidth 쮿 set egress-rate 왏 Syntax: set egress-rate 왏 Description: To set up the egress-rate of the ports.
PAGE 155
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management set ingress-rate 왏 Description: To set up the ingress-rate of the ports. 왏 Argument: :syntax 1,5-7, available from 1 to 26 EN : 66-1024000(Kb).
PAGE 156
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To display all current settings of the bandwidth. 왏 Argument: None. 왏 Possible value: None.
PAGE 157
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(config-file)# export start Export successful. 쮿 export user- conf 왏 Syntax: 왏 Description: To run the export user-conf function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(config-file)# export user-conf Export successful. 쮿 import start 왏 Syntax: 왏 Description: To run the import start function. 왏 Argument: None. 왏 Possible value: None.
PAGE 158
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To run the import user-conf function. 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(config-file)# import user-conf Import successful. 쮿 set export-path 왏 Syntax: 왏 Description: To set up the file path and filename that user would like to export. 왏 Argument: :filepath and filename 왏 Possible value: :filepath and filename 왏 Example: PSES-2126C(config-file)# set export-path log/21511.
PAGE 159
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(config-file)# show TFTP Server IP Address: 192.168.3.111 Export Path and Filename: log/21511.txt Import Path and Filename: log/21511.txt dhcp- boot 쮿 set dhcp- boot 왏 Syntax: 왏 Description: To set up the delay time for DHCP Boot. 왏 Argument: 왏 :range syntax: 0, 1-30.
PAGE 160
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Second : 30 PSES-2126C(dhcp-boot)# 쮿 diag 왏 Syntax: diag 왏 Description: Diag is used to test whether EEPROM, UART, DRAM and Flash is normal or not. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(diag)# diag EEPROM Test : OK UART Test : OK DRAM Test : OK Flash Test : OK 쮿 Loopback 왏 Syntax: loopback 왏 Description: For Internal/External Loopback Test. 왏 Argument: None. 왏 Possible value: None.
PAGE 161
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management External Loopback Test : Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Fail 쮿 ping 왏 Syntax: ping EN 왏 Description: To confirm that whether the remote end-station or switch itself is alive or not. 왏 Argument: : IP address or domain name 왏 Possible value: IP address, e.g. 192.168.2.65 or domain name, e.g. tw.yahoo.com 왏 Example: PSES-2126C(diag)# ping 192.168.1.115 Gateway : 192.168.1.
PAGE 162
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(firmware)# show TFTP Server IP Address: 192.168.3.111 Path and Filename : FEL2SW26_ES2126_v2.05.img 쮿 upgrade 왏 Syntax: 왏 Description: To run the software upgrade function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(firmware)# upgrade Upgrading firmware ...
PAGE 163
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 enable 왏 Syntax: enable 왏 Description: To enable the gvrp function. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(gvrp)# enable 쮿 group 왏 Syntax: group 왏 Description: To enter any of gvrp group for changing gvrp group setting. You can change the applicant or registrar mode of existing gvrp group per port. 왏 Argument: : enter which gvrp group you had created, using value is vid.
PAGE 164
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(gvrp-group-2)# show GVRP group VID: 2 Port Applicant Registrar 1 Non-Participant Normal 2 Non-Participant Normal 3 Non-Participant Normal 4 Non-Participant Normal 5 Non-Participant Normal 6 Non-Participant Normal 7 Normal Normal 8 Normal Normal 12 Normal Normal 13 Normal Normal EN ---- --------------- --------- : : 23 Normal Normal 24 Normal Normal 25 Normal Normal 26 Normal Normal
PAGE 165
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 5: Operation of CLI Management 5 Non-Participant Fixed 6 Non-Participant Fixed 7 Normal Fixed 8 Normal Fixed 9 Normal Fixed 10 Normal Fixed 17 Normal Normal : : 23 Normal Normal 24 Normal Normal 25 Normal Normal 26 Normal Normal 쮿 set applicant 왏 Syntax: set applicant 왏 Description: To set default applicant mode for each port.
PAGE 166
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To set default registrar mode for each port.
PAGE 167
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 5: Operation of CLI Management 1 20 Enable 60 1000 Normal Normal 2 20 Enable 60 1000 Normal Normal 3 20 Enable 60 1000 Normal Normal 4 20 Enable 60 1000 Normal Normal 5 20 Enable 60 1000 Normal Normal 6 20 Enable 60 1000 Normal Normal 7 20 Enable 60 1000 Normal Normal 8 20 Enable 60 1000 Normal Normal 9 20 Enable 60 1000 Normal Normal 10 20 Enable 60 1000 Normal Normal : : : 166 22 20 Disable 60 1000 N
PAGE 168
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set timer 왏 Syntax: set timer 왏 Description: To set gvrp join time, leave time, and leaveall time for each port. EN 왏 Argument: : port range, syntax 1,5-7, available from 1 to 26 : join timer, available from 20 to 100 : leave timer, available from 60 to 300 : leaveall timer, available from 1000 to 5000 Leave Time must equal double Join Time at least.
PAGE 169
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management EN ---- --------- ---------- ------------- -------------- --------- ---------1 20 Disable 60 1000 Normal Normal 2 20 Disable 60 1000 Normal Normal 3 20 Disable 60 1000 Normal Normal 4 20 Disable 60 1000 Normal Normal : : : 23 20 Disable 60 1000 Normal Normal 24 20 Disable 60 1000 Normal Normal 25 20 Disable 60 1000 Normal Normal 26 20 Disable 60 1000 Normal Normal 쮿 show counter 왏 Syntax: s
PAGE 170
LANCOM ES-2126+ und LANCOM ES-2126P Counter Name Received Transmitted -------------------- -------- ----------- Total GVRP Packets 0 0 Invalid GVRP Packets 0 ---- LeaveAll message 0 0 JoinEmpty message 0 0 JoinIn message 0 0 LeaveEmpty message 0 0 Empty message 0 0 EN 쮿 Chapter 5: Operation of CLI Management 쮿 show group 왏 Syntax: show group 왏 Description: To show the gvrp group. 왏 Argument: None. 왏 Possible value: None.
PAGE 171
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: : hostname, max. 40 characters. 왏 Possible value: : hostname, max. 40 characters. EN 왏 Example: PSES-2126C# hostname Company Company# igmp- snooping 쮿 add allowed- group 왏 Syntax: add allowed-group 왏 Description: To add the entry of allowed IP multicast group. 왏 Argument: : the range of IP multicast. : VLAN ID. 1-4094 or any.
PAGE 172
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Possible value: : the index of the allowed-group. 왏 Example: PSES-2126C(igmp-snooping)# del allowed-group 1 EN 쮿 set mode 왏 Syntax: 왏 Description: To set up the mode of IGMP Snooping.
PAGE 173
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To display IP multicast table. 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(igmp-snooping)# show multicast IP Multicast: None IP 쮿 disable dhcp 왏 Syntax: disable dhcp 왏 Description: To disable the DHCP function of the system. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(ip)# disable dhcp DHCP is already stopped.
PAGE 174
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(ip)# enable dhcp manual 쮿 set dns 왏 Syntax: set dns 왏 Description: To set the IP address of DNS server. EN 왏 Argument: : dns ip address 왏 Possible value: : 168.95.1.1 왏 Example: PSES-2126C(ip)# set dns 168.95.1.1 쮿 set ip 왏 Syntax: set ip 왏 Description: To set the system IP address, subnet mask and gateway.
PAGE 175
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To display the system’s DHCP function state, IP address, subnet mask, default gateway, DNS mode, DNS server IP address and current IP address. 왏 Argument: None. EN 왏 Possible value: None. 왏 Example: PSES-2126C(ip)# show DHCP : Disable IP Address : 192.168.1.1 Current IP Address : 192.168.1.1 Subnet mask : 255.255.255.0 Gateway : 192.168.1.253 DNS Setting : Manual DNS Server : 192.95.1.
PAGE 176
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To disable the auto-upload function. 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(log)# disable auto-upload 쮿 enable auto- upload 왏 Syntax: enable auto-upload 왏 Description: To enable the auto-upload function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(log)# enable auto-upload 쮿 show 왏 Syntax: show 왏 Description: To show a list of trap log events.
PAGE 177
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Tftp Server : 0.0.0.0 Auto Upload : Disable 1) Wed Apr 13 12:13:27 2005 Link Up [Port 1] EN 2) Wed Apr 13 12:13:26 2005 Link Down [Port 1] 3) Wed Apr 13 11:58:31 2005 Login [admin] 4) Wed Apr 13 11:19:45 2005 Login [admin] 5) Wed Apr 13 11:19:37 2005 Logout [admin] 쮿 upload 왏 Syntax: Upload 왏 Description: To upload log data through tftp. 왏 Argument: None. 왏 Possible value: None.
PAGE 178
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Possible value: : mac address 왏 Example: PSES-2126C(mac-table-alias)# del 00-44-33-44-55-44 EN 쮿 set 왏 Syntax: set 왏 Description: To set up the mac alias entry. 왏 Argument: : mac address, format: 00-02-03-04-05-06 : mac alias name, max. 15 characters 왏 Possible value: : mac address : max.
PAGE 179
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 2) 00-33-03-04-05-06 ccc <> 쮿 search 왏 Syntax: search EN 왏 Description: To look for the relative mac information in mac table.
PAGE 180
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management None. 왏 Example: PSES-2126C(mac-table-information)# show MAC Table List Alias MAC Address Port VID State ABC 00-40-c7-d6-00-01 1 2 Static Forwarding ABC123 00-40-c7-d6-00-02 1 3 Static Filtering EN ---------------- ----------------------- ---- ---- ----------------- <> 쮿 set aging 왏 Syntax: set aging 왏 Description: To set up the age out time of dynamic learning mac.
PAGE 181
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : 1 to 24 : 0 to 8191 왏 Example: PSES-2126C(mac-table-maintain)# set learning 5 100 EN 쮿 show 왏 Syntax: show 왏 Description: To display the settings of MAC table ageout time and the learning limit of each port. 왏 Argument: None. 왏 Possible value: None.
PAGE 182
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 25 8192 26 8192 <> EN 쮿 add 왏 Syntax: add 왏 Description: To add the static mac entry.
PAGE 183
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Possible value: : mac address 왏 Example: PSES-2126C(mac-table-static-mac)# del 00-02-03-04-05-06 EN 쮿 show 왏 Syntax: show 왏 Description: To display static mac entry. 왏 Argument: None. 왏 Possible value: None.
PAGE 184
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(management-add)# set This command will show exhaustive operating explanation for setting the management policy records. ACL entry name. [ ] VLAN ID. [ ] IP range. [ ] Incoming port. [ ] Access type. a(ccept) or d(eny). 왏 Possible value: [ ] No default and it must be set. [ ] The range is 1-4095 and can be set to any.
PAGE 185
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management [#]: a specific or range management security entry(s) 왏 Possible value: None. EN 왏 Example: PSES-2126C(management)# show #: 1 Name : Tom 192.168.1.30-192.168.1.80 Type : SNMP VlanID : 2 Action : Deny IP : Port : 1,2 PSES-2126C(management)# delete 1 PSES-2126C(management)# show Security rule list is empty now 쮿 edit the specific management policy entry. 왏 Available range: 1 to 65536.
PAGE 186
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management VLAN ID. [ ] IP Range. [ ] Incoming port. [ ] Access type. a(ccept) or d(eny). 왏 Possible value: [ ] No default and it must be set. [ ] The range is 1-4095 and can be set to any. [ ] For example, 192.168.1.90-192.168.1.
PAGE 187
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(management)# show #: 1 Name : Tom 192.168.1.30-192.168.1.80 Type : SNMP VlanID : 2 Action : Deny IP : Port : 1,2 EN poe 쮿 set priority 왏 Syntax: set priority 왏 Description: To set the PoE priority on ports.
PAGE 188
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(poe)# set state 11 0 쮿 show 왏 Syntax: show 왏 Description: To display the PoE status. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(poe)# show Vmain : 48.3 V Imain : 0.0 A Pconsume : 0.
PAGE 189
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Power Management Port Off | X X X X Port No 22 23 24 X X X X X X X X | 13 14 15 16 17 18 19 20 21 EN ------------------------- | -- -- -- -- -- -- -- -- --- -- -Port On |X X X X X X X X X X X X AC Disconnect Port Off X X X | X X X X X X X X X DC Disconnect Port Off X X X | X X X X X X X X X Overload Port Off X X X | X X X X X X X X X Short Circuit Port Off X X X | X X X X X X X
PAGE 190
LANCOM ES-2126+ und LANCOM ES-2126P 9 Normal Enable Normal 0.0 0 0 10 Normal Enable Normal 0.0 0 0 11 Normal Enable Normal 0.0 0 0 12 Normal Enable Normal 0.0 0 0 13 Normal Enable Normal 0.0 0 0 14 Normal Enable Normal 0.0 0 0 15 Normal Enable Normal 0.0 0 0 16 Normal Enable Normal 0.0 0 0 17 Normal Enable Normal 0.0 0 0 18 Normal Enable Normal 0.0 0 0 19 Normal Enable Normal 0.0 0 0 20 Normal Enable Normal 0.0 0 0 21 Normal Enable Normal 0.
PAGE 191
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management disable state 왏 Description: To disable the communication capability of the port. 왏 Argument: : port range, syntax 1,5-7, available from 1 to 26 EN 왏 Possible value: : 1 ~ 26 왏 Example: PSES-2126C(port)# disable state 12 쮿 enable state 왏 Syntax: enable state 왏 Description: To enable the communication capability of the port.
PAGE 192
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(port)# set flow-control 3-6 symmetric 쮿 set speed-duplex 왏 Syntax: set speed-duplex |[<10|100|1000> ] 왏 Description: To set up the speed and duplex of all ports.
PAGE 193
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: PSES-2126C(port)# show conf 쮿 show detail- counter 왏 Syntax: show detail-counter <#> EN 왏 Description: To display the detailed counting number of each port’s traffic. 왏 Argument: <#> : port, available from 1 to 26 왏 Possible value: <#>:1 ~ 26 왏 Example: PSES-2126C(port)# show detail-counter 6 쮿 show media 왏 Syntax: show media 왏 Description: To display the module 25 or 26 information.
PAGE 194
LANCOM ES-2126+ und LANCOM ES-2126P Vendor Name : APAC Opto Vendor PN : KM28-C3S-TC-N Vendor Rev : 0000 Vendor SN : 5425011140 Date Code : 050530 Temperature : none Vcc : none Mon1 (Bias) mA : none Mon2 (TX PWR) : none Mon3 (RX PWR) : none EN 쮿 Chapter 5: Operation of CLI Management 쮿 show simple- counter 왏 Syntax: show simple-counter 왏 Description: To display the summary counting of each port’s traffic. 왏 Argument: None. 왏 Possible value: None.
PAGE 195
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: PSES-2126C(port)# show status Port Media Link State Auto Nego.
PAGE 196
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To disable 802.1p qos. 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(qos)# disable 1p 쮿 disable dscp 왏 Syntax: disable dscp 왏 Description: To disable IP DSCP qos. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# disable dscp 쮿 disable qos 왏 Syntax: disable qos 왏 Description: To disable qos function. 왏 Argument: None. 왏 Possible value: None.
PAGE 197
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management disable tos 왏 Description: To disable IP TOS qos. 왏 Argument: None. EN 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# disable tos 쮿 enable 1p 왏 Syntax: enable 1p 왏 Description: To enable 802.1p qos. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# enable 1p 쮿 enable dscp 왏 Syntax: enable dscp 왏 Description: To enable IP DSCP qos. 왏 Argument: None. 왏 Possible value: None.
PAGE 198
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 enable qos 왏 Syntax: enable qos 왏 Description: To enable qos function. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# enable qos 쮿 enable tos 왏 Syntax: enable tos 왏 Description: To enable IP TOS qos. 왏 Argument: None. 왏 Possible value: None.
PAGE 199
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management You don't need to use all of queue, but must assign queue in order. Syntax: 1,2 or 2,5-7, available from 0 to 63. 왏 Possible value: : 0 to 63 EN 왏 Example: PSES-2126C(qos)# set dscp q0 2 q1 2 q2 2 q3 3 쮿 set pri-tag 왏 Syntax: set pri-tag [] [] [] [] 왏 Description: To set 802.1p qos weighting for 4 queues.
PAGE 200
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : wrr or strict : 1-55. 쮿 set tos 왏 Syntax: set tos [] [] [] [] 왏 Description: To set IP tos qos weighting for 4 queues. 왏 Argument: : Delay Priority: 0; Throughput Priority: 1; Reliability Priority: 2; Monetary Cost Priority: 3. : queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
PAGE 201
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: : syntax 1,5-7, available from 1 to 26 : enable/disable vip port for each port. 1: enable. 0: disable. 왏 Possible value: : 1 to 26 EN : 1 or 0 왏 Example: PSES-2126C(qos)# set vip 1-6 1 쮿 show dscp 왏 Syntax: show dscp 왏 Description: To show IP DSCP Qos configuration. 왏 Argument: None. 왏 Possible value: None.
PAGE 202
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management DiffServ Queue DiffServ Queue DiffServ Queue DiffServ Queue ---------- ------- ---------- ------- ---------- ------ ---------- -----0 4 7 1 0 2 0 0 5 0 6 0 0 9 0 10 0 0 13 0 14 0 1 17 1 18 1 1 21 1 22 1 1 25 1 26 1 1 29 1 30 1 2 33 2 34 2 2 37 2 38 2 2 41 2 42 2 2 45 2 46 2 3 49 3 50 3 3 53 3 54 3 0 8 11 0 12 15 0 16 19 1 20 23 1 24 27 1 28 31 1
PAGE 203
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 56 59 3 57 3 58 3 3 61 3 62 3 3 60 63 3 EN 쮿 show port 왏 Syntax: show port 왏 Description: To show VIP port configuration. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# show port Port Based Priority ==================== Global QoS mode: Enable QoS Enable 802.
PAGE 204
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 show priority-tag 왏 Syntax: show priority-tag 왏 Description: To show 802.1p Qos configuration. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# show priority-tag 802.1p priority ==================== Global QoS mode: Enable QoS Enable 802.1p Priority Disable ip tos classification Disable ip diffserv classification Scheduling: weighted round robin method. weight: = 16.
PAGE 205
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 show tos 왏 Syntax: show tos 왏 Description: To show IP tos Qos configuration. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(qos)# show tos ip tos classification ==================== Global QoS mode: Enable QoS Disable 802.1p Priority Enable ip tos classification Disable ip diffserv classification Scheduling: weighted round robin method. weight: = 16.
PAGE 206
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management P0 P1 P2 P3 P4 P5 P6 P7 ---- ---- ---- ---- ---- ---- ---- ---Queue 0 0 1 1 2 2 3 3 P5 P6 P7 P0 P1 P2 P3 P4 EN TOS type: Throughput Priority ---- ---- ---- ---- ---- ---- ---- ---Queue 0 0 1 1 2 2 3 3 P5 P6 P7 TOS type: Reliability Priority P0 P1 P2 P3 P4 ---- ---- ---- ---- ---- ---- ---- ---Queue 0 0 1 1 2 2 3 3 TOS type: Monetary Cost Priority reboot 쮿 reboot 왏 Syntax: reboot 왏
PAGE 207
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set 왏 Syntax: set 왏 Description: To set up the function of the isolated group. EN 왏 Argument: 왏 : isolated port; range syntax: 1,5-7, available from 0 to 26 set 0 as disabled 왏 Possible value: :0 to 26 왏 Example: PSES-2126C(security-isolated-group)# set 2,3,4 쮿 show 왏 Syntax: show 왏 Description: To display the current setting status of isolated group. 왏 Argument: None. 왏 Possible value: None.
PAGE 208
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management None. 왏 Possible value: None. 왏 Example: PSES-2126C(security-mirror)# disable EN 쮿 enable 왏 Syntax: enable 왏 Description: To enable the function of mirror. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(security-mirror)# enable 쮿 set 왏 Syntax: set 왏 Description: To set up the monitoring port and monitored ports of the mirror function.
PAGE 209
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(security-mirror)# set 1 4 2-3 쮿 show 왏 Syntax: show 왏 Description: To display the current setting status of mirror. EN 왏 Argument: None. 왏 Possible value: None.
PAGE 210
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 enable 왏 Syntax: enable set-community enable snmp 왏 Description: The Enable here is used for the activation snmp or set-community. EN 왏 Argument: None. 왏 Possible value: None.
PAGE 211
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(snmp)# set trap 1 192.168.1.1 162 public 쮿 show 왏 Syntax: show 왏 Description: The Show here is to display the configuration of SNMP. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(snmp)# show SNMP : Enable Get Community: public Set Community: private [Enable] Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public Trap Host 2 IP Address: 0.0.0.
PAGE 212
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To force the port to transmit RST BPDUs. 왏 Argument: : syntax 1,5-7, available from 1 to 26 왏 Possible value: : 1 to 26 EN 왏 Example: PSES-2126C(stp)# Mcheck 1-8 쮿 disable 왏 Syntax: disable 왏 Description: To disable the function of STP. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(stp)# disable 쮿 enable 왏 Syntax: enable 왏 Description: To enable the function of STP. 왏 Argument: None.
PAGE 213
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Description: To set up the parameters of STP. 왏 Argument: : priority must be a multiple of 4096,available from 0 to 61440. : available from 1 to 10. EN : available from 6 to 40. : available from 4 to 30. Note: 2*(Forward Delay -1) >= Max Age Max Age >= 2*(Hello Time +1) 왏 Possible value: : 0 to 61440. : 1 to 10. : 6 to 40.
PAGE 214
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : auto / true / false 왏 Example: PSES-2126C(stp)# set port 1-16 0 128 yes auto 쮿 set version 왏 Syntax: set version EN 왏 Description: To set up the version of STP. 왏 Argument: :stp / rstp 왏 Possible value: :stp / rstp 왏 Example: PSES-2126C(stp)# set version rstp 쮿 show config 왏 Syntax: show config 왏 Description: To display the STP configuration data. 왏 Argument: None.
PAGE 215
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 show port 왏 Syntax: show port 왏 Description: To display the port information of STP. EN 왏 Argument: None. 왏 Possible value: None.
PAGE 216
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 25 Auto DISCARDING 20000 128 No 26 Auto DISCARDING 20000 128 No EN 쮿 show status 왏 Syntax: show status 왏 Description: To display of the status of STP. 왏 Argument: None. 왏 Possible value: None.
PAGE 217
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management set contact 왏 Description: To set the contact description of the switch. 왏 Argument: :string length up to 40 characters. EN 왏 Possible value: : A, b, c, d, ... ,z and 1, 2, 3, …. etc. 왏 Example: PSES-2126C(system)# set contact Taipei 쮿 set device- name 왏 Syntax: set device-name 왏 Description: To set the device name description of the switch.
PAGE 218
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 show 왏 Syntax: show 왏 Description: To display the basic information of the switch. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(system)# show Model Name : PSES-2126C System Description Managed PoE Switch : 24-Port 10/100BaseT/TX Location : Contact : Device Name : PSES-2126C System Up Time : 0 Days 0 Hours 4 Mins 50 Secs Current Time : Wed Feb 08 16:55:29 2006 BIOS Version : v1.
PAGE 219
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management show access 왏 Description: Shows the access configuration. 왏 Example: ES-2126+(tac-plus)# show access EN Access retry : 3 Access Login Login Primary Secondary ------- ------- --------Console Local None Telnet TACACS Local Web TACACS Local 쮿 show tac-plus 왏 Syntax: show tac-access 왏 Description: Shows the TACACS+ configuration.
PAGE 220
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Enables the TACACS+ functions for accounting, authorization and fallback to local authorization. 왏 Arguments: Accounting: enables the TACACS+ accounting. Authorization: enables the TACACS+ authorization. Fallback-author: enables the fallback to local authorization. EN 쮿 disable 왏 Syntax: disable 왏 Description: Disables the TACACS+ functions for accounting, authorization and fallback to local authorization.
PAGE 221
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 set host 왏 Syntax: set host <#> 왏 Description: Sets the IP addresses for the first and secondary TACACS+ server. EN 왏 Arguments: #: Number from 1 (first TACACS+ server) to 2 (secondary TACACS+ server). ip: IP address of the TACACS+ server 왏 Example: ES-2126+(tac-plus)# set host 1 10.1.1.1 Sets the IP address of the primary TACACS+ server to “10.1.1.1”.
PAGE 222
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management value even on the secondary TACACS+ server, the secondary login method will be used. 왏 Arguments: retry: 1 to 3. 왏 Example: ES-2126+(tac-plus)# set retry 2 EN Sets the access retry value to “2”. 쮿 set telnet- access 왏 Syntax: set telnet-access 왏 Description: Sets the primary and secondary access mode for the login via telnet.
PAGE 223
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: ES-2126+(tac-plus)# set web-access 1 0 Sets the primary access mode for the login via web browser to TACACS+ and the secondary access mode to local user accounts. tftp EN 쮿 set server 왏 Syntax: set server 왏 Description: To set up the IP address of tftp server. 왏 Argument: : the IP address of tftp server 왏 Possible value: : tftp server IP 왏 Example: PSES-2126C(tftp)# set server 192.168.3.
PAGE 224
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management set daylightsaving
왏 Description: To set up the daylight saving.
PAGE 225
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : (2000-2036) : (01-12)
: (01-31) : (00-23) : (00-59) : (00-59) 왏 Example: PSES-2126C(time)# set manual 2005/04/21 16:18:50 EN 쮿 set ntp 왏 Syntax: set ntp 왏 Description: To set up the current time via NTP server.
PAGE 226
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management Current Time NTP Server Timezone : Wed Apr 21 06:16:22 2005 : 209.81.9.7 : 8 Day light Saving : 4 Hours Day light Saving Start: Mth: 2 Day: 20 Hour: 10 EN Day light Saving End : Mth: 3 Day: 20 Hour: 10 trunk 쮿 del trunk 왏 Syntax: del trunk 왏 Description: To remove the trunk port.
PAGE 227
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: PSES-2126C(trunk)# set hash 2 쮿 set priority 왏 Syntax: set priority EN 왏 Description: To set up the LACP system priority. 왏 Argument: :available from 1 to 65535. 왏 Possible value: :1 to 65535.
PAGE 228
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management : 1-3. : active or passive 왏 Example: PSES-2126C(trunk)# set trunk 2-5 lacp 1 active EN 쮿 show aggtr- view 왏 Syntax: show aggtr-view 왏 Description: To display the aggregator list. 왏 Argument: None. 왏 Possible value: None.
PAGE 229
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: None. 왏 Possible value: None. EN 왏 Example: PSES-2126C(trunk)# show lacp-config LACP System Priority : 33333 Hash Method : DA 쮿 show lacp-detail 왏 Syntax: show lacp-detail 왏 Description: To display the detailed information of the LACP trunk group.
PAGE 230
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management ------ -------- ----------------- --------------- ---------------2 257 --- 2 0 쮿 show status 왏 Syntax: show status EN 왏 Description: Description: To display the aggregator status and the settings of each port. 왏 Argument: None. 왏 Possible value: None.
PAGE 231
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 5: Operation of CLI Management 12 None 0 Active 12 --- 13 None 0 Active 13 --- 14 None 0 Active 14 --- 15 None 0 Active 15 --- 16 None 0 Active 16 --- 17 None 0 Active 17 --- 18 None 0 Active 18 --- 19 None 0 Active 19 --- 20 None 0 Active 20 --- 21 None 0 Active 21 --- 22 None 0 Active 22 --- 23 None 0 Active 23 --- 24 None 0 Active 24 --- 25 None 0 Active 25 --- 26 None
PAGE 232
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management To delete the tag-based VLAN group. 왏 Argument: : VLAN ID, available from 1 to 4094 왏 Possible value: : 1 to 4094 EN 왏 Example: PSES-2126C(VLAN)# del tag-group 2 쮿 disable double-tag 왏 Syntax: disable double-tag 왏 Description: To disable double-tag. 왏 Argument: None. 왏 Possible value: None.
PAGE 233
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management disable svl 왏 Description: To enable Independent VLAN Learning. 왏 Argument: None. EN 왏 Possible value: None. 왏 Example: PSES-2126C(VLAN)# disable svl 쮿 disable symmetric 왏 Syntax: disable symmetric 왏 Description: To Not drop frames from the non-member port. 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(VLAN)# disable symmetric 쮿 enable double- tag 왏 Syntax: enable double-tag 왏 Description: To enable double-tag.
PAGE 234
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 enable drop- untag 왏 Syntax: enable drop-untag 왏 Argument: 왏 : which port(s) you want to drop untagged frames. Syntax: 1,5-7, available from 1 to 26 왏 Possible value: : 1 to 26 왏 Example: PSES-2126C(VLAN)# enable drop-untag 2,4,5-7 쮿 enable svl 왏 Syntax: enable svl 왏 Description: To enable Shared VLAN Learning. 왏 Argument: None. 왏 Possible value: None.
PAGE 235
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Example: PSES-2126C(VLAN)# enable symmetric 쮿 set mode 왏 Syntax: set mode EN 왏 Description: To switch VLAN mode between port-based and tag-based modes.
PAGE 236
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 왏 Argument: : which port(s) you want to set PVID(s).
PAGE 237
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management show config 왏 Description: To display the current VLAN mode, Symmetric VLAN, SVL and Double tag states. 왏 Argument: None. EN 왏 Possible value: None. 왏 Example: PSES-2126C(VLAN)# show config Current VLAN mode:Tag-based VLAN Global setting: Symmetric VLAN : Disable (Asymmetric) SVL : Disable (IVL) Double tag : Disable 쮿 show group 왏 Syntax: show group 왏 Description: To display VLAN mode and VLAN group. 왏 Argument: None.
PAGE 238
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management VID :1 Member:1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 EN Untag :1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2) Name :VLAN-2 VID :2 Member:2 3 4 5 6 13 14 15 Untag : 쮿 show pvid 왏 Syntax: show pvid 왏 Description: To display pvid, priority and drop untag result. 왏 Argument: None. 왏 Possible value: None.
PAGE 239
LANCOM ES-2126+ und LANCOM ES-2126P EN 쮿 Chapter 5: Operation of CLI Management 9 1 0 Disable 10 1 0 Disable 11 1 0 Disable 12 1 0 Disable 13 1 0 Disable 14 1 0 Disable 15 1 0 Disable 16 1 0 Disable 17 1 0 Disable 18 1 0 Disable 19 1 0 Disable 20 1 0 Disable 21 1 0 Disable 22 1 0 Disable 23 1 0 Disable 24 1 0 Disable 25 1 0 Disable 26 1 0 Disable vs 쮿 disable 왏 Syntax: disable 왏 Description: To disable the virtual stack.
PAGE 240
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management 쮿 enable 왏 Syntax: enable 왏 Description: To enable the virtual stack. EN 왏 Argument: None. 왏 Possible value: None. 왏 Example: PSES-2126C(vs)# enable 쮿 set gid 왏 Syntax: set gid 왏 Description: To set the group id. 왏 Argument: : group ID 왏 Possible value: : a-z,A-Z,0-9 왏 Example: PSES-2126C(vs)# set gid group1 쮿 set role 왏 Syntax: set role 왏 Description: To set role.
PAGE 241
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 5: Operation of CLI Management PSES-2126C(vs)# set role master 쮿 show 왏 Syntax: show 왏 Description: To display the configuration of the virtual stack. EN 왏 Argument: None. 왏 Possible value: None.
PAGE 242
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 6: Appendix 6 Appendix Performance data and specifications LANCOM ES-2126+ Performance LAN protocols 802.3af Features Interfaces LANCOM ES-2126P Switching technology Store and forward with latency less than 5 μs MAC addresses Support of max 8K MAC addresses Throughput max. 8.
PAGE 243
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 6: Appendix EN LANCOM ES-2126+ LANCOM ES-2126P CE CE conformity according to EN 55022, EN 55024, EN 60950 Environment Temperature range 0–40°C; humidity 5–90%; non-condensing Accessories 쮿 1000Base-SX SFP module, LANCOM SFP-SX-LC1, item no. 61556 쮿 1000Base-LX SFP module, LANCOM SFP-LX-LC1, item no.
PAGE 244
LANCOM ES-2126+ und LANCOM ES-2126P 쮿 Chapter 6: Appendix 6.2 6.2.1 Connector wiring Ethernet interface 10/100Base-TX Connector 6.3 Pin Line 1 T+ 2 T- 3 R+ 4 PoE/G 5 PoE/G 6 R- 7 PoE/ -48 V 8 PoE/ -48 V EN 8-pin RJ45 sockets (ISO 8877, EN 60603-7) CE-declarations of conformity LANCOM Systems herewith declares that the devices of the type described in this documentation are in agreement with the basic requirements and other relevant regulations of the 1995/5/EC directive.