Installation guide

Management
Automatic assignement of the management IP address by DHCPDHCP client
Automatic time settings with Simple Network Time Protocol (SNTP)SNTP
Standard for monitoring of high-speed-networks. Visualization of network use, accounting an analysation to protect your network against dangerss-Flow
Hardware
Internal power supply unit (110–230 V, 50-60 Hz)Power supply
Temperature range 0–40° C; humidity 10–90%; non-condensingEnvironment
Robust metal housing, 19' 1U (440 x 44 x 209 mm) with removable mounting brackets, network connectors on the frontHousing
3Fans
ca. 470 WattPower consumption (max)
Declarations of conformity
EN 55022, EN 55024, EN 60950CE
FCC Part 15 (CFR47) Class AFCC
Supported IEEE standards
Link Layer Discovery Protocol (LLDP)IEEE 802.1AB
LLDP-MEDIEEE 802.1AB
MAC BridgingIEEE 802.1d
Spanning TreeIEEE 802.1d
Class of ServiceIEEE 802.1p
VLANIEEE 802.1q
Multiple Spanning Tree Protocol (MSTP)IEEE 802.1s
Rapid Spanning Tree Protocoll (RSTP)IEEE 802.1w
Port Based Network Access ControlIEEE 802.1X
10Base-T EthernetIEEE 802.3
1000Base-TX EthernetIEEE 802.3ab
Link Aggregation Control Protocol (LACP)IEEE 802.3ad
Energy Efficient EthernetIEEE 802.3az
100Base-T EthernetIEEE 802.3u
Flow ControlIEEE 802.3x
1000Base-X EthernetIEEE 802.3z
Supported RFC standards
Telnet Protocol SpecificationRFC 854
MIB IIRFC 1213
SNMP Generic TrapsRFC 1215
Bridge MIBRFC 1493
Simple Network Time Protocol (SNMP)RFC 1769
Remot Network Monitoring MIB v2 (RMONv2)RFC2021
Interface MIBRFC 2233
SMON MIBRFC 2613
HTTP AuthenticationRFC 2617
Ethernet-Like MIBRFC 2665
802.1p and IEEE 802.1q Bridge MIBRFC 2674
Hypertext Transfer Protocol Secure (HTTPS)RFC 2818
LANCOM GS-2352