Installation guide

Layer-3-Routing
Supports static routing (in preparation)Static Layer-3-Routing
IPv6
IPv4 and IPv6 in parallel to support migrationIPv4/IPv6 dual stack
1
IPv6 host mode
1
Dual IPv6/ IPv4 stack
1
IPv6 neighbor and router discovery (ND)
1
IPv6 stateless address auto-configuration
1
Path maximum transmission unit (MTU) discovery
1
Duplicate address detection (DAD)
1
ICMP version6
IPv6 mechanisms
Prioritization of IPv6 packets in hardwareIPv6 QoS
Drop or rate limiting of IPv6 packets due to ACLs in hardwareIPv6 ACL
MLD snooping to limit multicast packets to ports with receiversMulticast Listener Discovery
Web interface/SSL, Telnet/ SSH, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, Syslog, DNS Client,
protocol-based VLANs
IPv6 services
Interfaces
1
48 TP ports 10/100/1000 mbps
1
4 SFP+ Ports 1G/10 gbit/s
1
52 concurrent Ethernet ports in total
Ethernet
Serial configuration interfaceSerial interface
Management
Integrated web server with setup wizard for the configuration via Internet browsers with HTTP or HTTPS. Web interface with system dashboard,
configuration menu, maintenance and monitoring functions
WEBconfig
Supported by LANconfig (LANCOM management software): automatic detection, display of device properties, opening of web configurationLANconfig
The LANCOM Large Scale Monitor (LSM) is a professional tool for monitoring medium-sized to large-scale networks with 25 to 1,000 network
components. Designed especially for LANCOM components including WLAN access points, controllers, switches, and routers, this system based on
open-source components additionally allows for the monitoring of third-party products such as servers and printers. Problems in the network are
clearly displayed in tables or graphical floor plans, and they trigger alert messages via e-mail if certain threshold values are not maintained.
Large Scale Monitor (LSM)
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the device and port statusLANmonitor
Easy setup of ports for QoS and Security based on pre-defined configuration profilesEasy-Configuration-Ports
Traffic can be mirrored from on port to another for investigation with network analyzer or RMON probe. Up to 8 ports can be mirrored to a single
mirror port. Single sessions can be selected
Port Mirroring
Access rights (read/write) can be set up separately, access control listSecurity
SNMP management via SNMPv1, v2c or v3 with support of traps. User-based security model for SNMPv3 (USM)SNMP
Diagnosis from the switch with PING and cable diagnosisDiagnosis
Configuration and status display from the command line with console application and direct connection to console port, via Telnet or SSHCommand Line Interface (CLI)
Integrated RMON software agent supports 4 RMON groups (history, statistics, alarms and events) for enhanced traffic management, monitoring
and analysis
Remote Monitoring
1
Update via WEBconfig and browser (HTTP/HTTPS)
1
Update via TFTP and LANconfig
1
Dual firmware image to update during operation
Firmware update
Securely import and export filesSecure Copy
LANCOM GS-2352