LANCOM L-1302acn dual Wireless Dual radio access point for Gigabit WLAN in modern enterprise environments 1 1 x Gigabit WLAN based on IEEE 802.11ac (5 GHz) with up to 1,300 Mbps 1 1 x WLAN based on IEEE 802.11n (2,4 or 5 GHz) with up to 450 Mbps 1 Parallel operation at 2.4 and 5 GHz as well as IEEE 802.
The LANCOM L-1302acn dual Wireless accelerates Wireless LAN to Gigabit speed. Thanks to the support of the modern WLAN standard IEEE 802.11ac a gross data rate of up to 1,300 Mbps is achieved. With its two WLAN radio modules both 11n clients (via 2.4 GHz) and the increasing number of modern 11ac clients (via 5 GHz) can be provided with high-speed WLAN. On top of that, LANCOM access points with IEEE 802.11ac are fully backwards compatible to older WLAN standards as 802.11a/b/g/n.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 WLAN Frequency band 2.4 GHz and 5 GHz 2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions) Data rates IEEE 802.11n Module 1: 1300 Mbps according to IEEE 802.11ac with MCS9 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.11n Module 2: 450 Mbps according to IEEE 802.11n with MCS23 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.11b/g Module 2: 54 Mbps to IEEE 802.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 WLAN Quality of Service Prioritization according to Wireless Multimedia Extensions (WME, subset of IEEE 802.11e) U-APSD/WMM Power Save**** Extension of power saving according to IEEE 802.11e by Unscheduled Automatic Power Save Delivery (equivalent to WMM Power Save). U-APSD supports the automatic switch of clients to a doze mode.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 IEEE 802.11ac/IEEE 802.11n Features Short Guard Interval The guard interval is the time between OFDM symbols in the air. IEEE 802.11n gives the option for a shorter 400 nsec guard interval compared to the legacy 800 nsec guard interval.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 High availability / redundancy VRRP VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions, incl.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 Interfaces ETH1 (PoE) 10/100/1000 Base-T, autosensing, auto node hub, PoE compliant with IEEE 802.3af/at. The port supports energy saving according to IEEE 802.3az ETH2 10/100/1000 Base-T, default LAN port, configurable as WAN port. The port supports energy saving according to IEEE 802.3az DSL over LAN (DSLoL) One LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 Management TACACS+ Support of TACACS+ protocol for authentication, authorization and accounting (AAA) with reliable connections and encrypted payload. Authentication and authorization are separated completely. LANCOM access rights are converted to TACACS+ levels. With TACACS+ access can be granted per parameter, path, command or functionality for LANconfig, WEBconfig or Telnet/SSH. Each access and all changes of configuration are logged.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 Declarations of conformity* 2.4 GHz WLAN EN 300 328 5 GHz WLAN EN 301 893 Notifications Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Switzerland, UK, Italy, Spain, France, Portugal, Czech Republic, Denmark IPv6 IPv6 Ready Gold *) Note You will find all declarations of conformity in the products section of our website at www.lancom-systems.
LANCOM L-1302acn dual Wireless Features as of: LCOS 9.00 Accessories LANCOM Wall Mount (White) For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61345 Analog modem backup/serial adapter LANCOM Serial Adapter Kit, item no. 61500 *) Note The Polarization Diversity antennas require 2 cables and surge arrestors Item number(s) 61732(EU), 61733(UK) LANCOM, LANCOM Systems and LCOS are registered trademarks.