manual

LANCOM Content Filter
 Chapter 2: Configuring the LANCOM Content Filter
10
EN
2.2 Requirements for using the LANCOM Content Filter
The following requirements must be met before you can use the LANCOM
Content Filter:
쐃 The firewall must be activated and an appropriate firewall rule must select
the content filter profile.
쐇 The content filter profile must specify a category profile and if desired a
whitelist and or blacklist for each part of the day. A content filter profile
can consist of several different entries to provide different levels of
protection during different parts of the day.
If a certain part of the day is not covered by an entry, access to websites
will go unchecked for this period.

If the content filter profile is subsequently renamed, the firewall must
also be modified.
2.3 Quick start
After installing the LANCOM Content Filter, all the settings have been made
to get it up and running quickly.

The operation of the LANCOM Content Filter may be restricted by your
country's data protection regulations or by company guidelines.
Please check any regulations that may apply before putting the
system into operation.
You activate the LANCOM Content Filter by:
쐃 Start the Setup Wizard for the device.
쐇 Select the Setup Wizard for configuring the Content Filter.