LANCOM L-460agn dual Wireless Dual-radio access point with elegant design for high-speed WLAN in modern enterprise environments 1 Modern design with elegant white housing 1 Parallel operation at 2.4 and 5 GHz for heterogeneous client environments 1 Spectral Scan for troubleshooting WLAN operations 1 Optimized network load at 2.
The LANCOM L-460agn dual Wireless is the right choice where fast, high-bandwidth WLAN should be made available to a user community with a variety of wireless devices. With its two radio modules offering 450 Mbps, this access point simultaneously serves clients in the 2.4 and 5 GHz bands and is hence ideal for complex WLAN scenarios with high demands to performance. On top of that, its elegant white housing makes it ideal for an inconspicuous application in modern environments.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 WLAN Frequency band 2.4 GHz and 5 GHz 2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions) Data rates IEEE 802.11n Module 1: 450 Mbps according to IEEE 802.11n with MCS23 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.11n Module 2: 450 Mbps according to IEEE 802.11n with MCS23 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.11b/g 54 Mbps to IEEE 802.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 WLAN operating modes WLAN bridge Point-to-multipoint connection of up to 16 Ethernet LANs (mixed operation optional), broken link detection, blind mode, supports VLAN When configuring Pt-to-Pt links, pre-configured names can be used as an alternative to MAC Adresses for creating a link.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 High availability / redundancy Line monitoring Line monitoring with LCP echo monitoring, up to 4 addresses for end-to-end monitoring with ICMP polling Routing functions Router IP and NetBIOS/IP multi-protocol router Advanced Routing and Forwarding Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration of IP networks in the device, i.e.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 Interfaces ETH1 (PoE) 10/100/1000 Base-T, autosensing, auto node hub, PoE compliant with IEEE 802.3af. The port supports energy saving according to IEEE 802.3az ETH2 10/100/1000 Base-T, default LAN port, configurable as WAN port. The port supports energy saving according to IEEE 802.3az DSL over LAN (DSLoL) One LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 Management Remote maintenance of 3rd party devices A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary TCP-based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN.
LANCOM L-460agn dual Wireless Features as of: LCOS 9.00 Scope of delivery Manual Hardware Quick Reference (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL) CD/DVD Data medium with management software (LANconfig, LANmonitor, WLANmonitor, LANCAPI) and documentation Cable 1 Ethernet cable, 3 m Power supply unit External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to +45° C, LANCOM item no.
LANCOM L-460agn dual Wireless Antenna Gain antenna pattern, front view antenna pattern, side view Features as of: LCOS 9.
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 7/2014 LANCOM L-460agn dual Wireless www.lancom.eu LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail info@lancom.eu I Internet www.lancom.eu Features as of: LCOS 9.
