LANCOM L-322E Wireless Innovative quad-radio access point for WLAN, the update of Wireless ePaper Displays, and iBeacon technology 1 Two integrated IEEE 802.11n WLAN radio modules for the parallel operation at 2.4 and 5 GHz with up to 300 Mbps 1 Integrated radio module for updating LANCOM Wireless ePaper Displays 1 Integrated iBeacon technology 1 Fast Ethernet connector with Power over Ethernet based on IEEE 802.
The LANCOM L-322E Wireless provides a world’s first innovation: Professional WLAN coverage, wireless updates of LANCOM Wireless ePaper Displays, and iBeacon support in just on access point. The integration of all these radio technologies in one device enables an unprecedented range of applications in just one infrastructure. Digital, wireless labeling. The LANCOM L-322E Wireless is equipped with a radio module for updating the innovative LANCOM Wireless ePaper Displays.
LANCOM L-322E Wireless Features as of: LCOS 9.04 WLAN Frequency band 2.4 GHz and 5 GHz 2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions) Data rates IEEE 802.11n Module 1: 300 Mbps according to IEEE 802.11n with MCS15 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.11n Module 2: 300 Mbps according to IEEE 802.11n with MCS15 (Fallback to 6,5 Mbps with MCS0) Data rates IEEE 802.
LANCOM L-322E Wireless Features as of: LCOS 9.04 WLAN U-APSD/WMM Power Save Extension of power saving according to IEEE 802.11e by Unscheduled Automatic Power Save Delivery (equivalent to WMM Power Save). U-APSD supports the automatic switch of clients to a doze mode.
LANCOM L-322E Wireless Features as of: LCOS 9.04 WLAN operating modes WLAN router Use of the LAN connector for simultaneous DSL over LAN, IP router, NAT/Reverse NAT (IP masquerading) DHCP server, DHCP client, DHCP relay server, DNS server, PPPoE client (incl.
LANCOM L-322E Wireless Features as of: LCOS 9.04 High availability / redundancy VRRP VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions, incl.
LANCOM L-322E Wireless Features as of: LCOS 9.04 WAN operating mode xDSL (ext. modem) ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem Interfaces LAN 10/100/1000 Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af 2nd LAN port (ETH2) 10/100Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af DSL over LAN (DSLoL) One LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
LANCOM L-322E Wireless Features as of: LCOS 9.04 Management TACACS+ Support of TACACS+ protocol for authentication, authorization and accounting (AAA) with reliable connections and encrypted payload. Authentication and authorization are separated completely. LANCOM access rights are converted to TACACS+ levels. With TACACS+ access can be granted per parameter, path, command or functionality for LANconfig, WEBconfig or Telnet/SSH. Each access and all changes of configuration are logged.
LANCOM L-322E Wireless Features as of: LCOS 9.04 Declarations of conformity* *) Note You will find all declarations of conformity in the products section of our website at www.lancom-systems.
LANCOM L-322E Wireless Features as of: LCOS 9.04 Item number(s) 61576 (EU), 61582 (UK) LANCOM L-322E Wireless 10-piece bulk 61586 LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 9/2014 LANCOM L-322E Wireless (EU,UK) www.lancom.eu LANCOM Systems GmbH I Adenauerstr.
