Datasheet

Management
Access rights (read/write) over WAN or (W)LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control listSecurity
Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations, irrespective of software
versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination
to run scripts for automation. Scripts can send e-mails with various command line outputs as attachments
Scripting
LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the command
LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available. In
addition, LoadFile allows the upload of files including certificates and secured PKCS#12 containers
Load commands
SNMP management via SNMPv2, private MIB exportable by WEBconfig, MIB IISNMP
Scheduled control of parameters and actions with CRON serviceTimed control
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging buffer for SYSLOG
and firewall events, monitor mode for Ethernet ports
Diagnosis
Supported by all LANCOM WLAN controller (separate optional hardware equipment for installation, optimization, operating and monitoring of
WLAN networks, except for P2P connections)
LANCOM WLAN controller
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counterStatistics
The used data volume of WAN connections (PPP, IPoE, PPTP, L2TP, IPSec) can be monitored and different actions can be triggered once certain
thresholds are passed
Volume budget
Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed
(CRON) command to reset all counters at once
Accounting
Accounting information exportable via LANmonitor and SYSLOGExport
Hardware
207 mm x 148 mm x 44 mm (Length/Width/Height)Dimensions
approximately 1.2 kg excluding mounting materialWeight
4 LEDs for Power, Ethernet 1, Ethernet 2 and WLANLED display
12 V DC, external power adapter (230 V) with bayonet cap to protect against accidentally unpluggingPower supply
24 V DC, input voltage range 10 - 28 VPower supply
Via Power over Ethernet, compliant with IEEE 802.3afPower supply
Configurable reset switch for resetting and booting the deviceReset button
Temperature range -20 – +50° C; humidity 0–95%; non-condensing, please note that depending on the intended use your power supply has to
support the extended temperature range
Environment
Robust metal housing, IP 50 protection rating, ready for wall, pole and top-hat rail mountingHousing
approx. 7 Watts with 12 V, approx. 9 Watts with 24 V power supplyPower consumption (max)
Declarations of conformity*
EN 60950-1, EN 301 489-1, EN 301 489-17CE
UL-2043UL
EN 300 3282.4 GHz WLAN
EN 301 8935 GHz WLAN
Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Switzerland, UK, Italy, Spain, France, Portugal, Czech Republic,
Denmark
Notifications
IPv6 Ready GoldIPv6
You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note
Scope of delivery
Hardware Quick Reference (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)Manual
Data medium with management software (LANconfig, LANmonitor, WLANmonitor, LANCAPI) and documentationCD/DVD
Serial configuration cable, 1.5mCable
LANCOM IAP-321
Features as of: LCOS 9.00