Datasheet

Layer 2 functions
Automatic discovery of network topology in layer 2 networks (Link Layer Discover Protocol).LLDP
COM port server
COM-port server for the DIN interface. For a serial device connected to it, the server manages its own virtual COM port via Telnet (RFC 2217) for
remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion and alternative binary
mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries
COM port forwarding
LAN protocols
ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP, TCP, TFTP,
UDP, VRRP, VLAN
IP
802.1d Spanning Tree and 802.1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connectionsRapid Spanning Tree
NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (with DHCPv6), router advertisements, ICMPv6, DHCPv6,
DNS, HTTP, HTTPS, PPPoE, TCP, UDP
IPv6
IPv6
IPv4/IPv6 dual stackDual Stack
WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, FirewallIPv6 compatible LCOS applications
WAN protocols
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, IPEthernet
IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IPoE (autoconfiguration, DHCPv6 or static)IPv6
6to4, 6in4, 6rd (static and via DHCP)Tunneling protocols (IPv4/IPv6)
WAN operating mode
ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modemxDSL (ext. modem)
Interfaces
10/100/1000 Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3afLAN
The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.DSL over LAN (DSLoL)
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
Serial interface
Radio module uses two internal antennas.Internal antenna
LCMS (LANCOM Management System)
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration
and management of multiple devices over IP connection (HTTPS, HTTP, TFTP). A tree view of the setting pages like in WEBconfig provides quick
access to all settings in the configuration window. Password fields which optionally display the password in plain text and can generate complex
passwords. Configuration program properties per project or user. Automatic storage of the current configuration before firmware updates. Exchange
of configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection and display of the
LANCOM managed switches. Extensive application help for LANconfig and parameter help for device configuration. LANCOM QuickFinder as search
filter within LANconfig and device configurations that reduces the view to devices with matching properties
LANconfig
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING
diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for standard diagnostics. Export of diagnostic files
for support purposes (including bootlog, sysinfo and device configuration without passwords). Graphic display of key values (marked with an icon
in LANmonitor view) over time as well as table for minimum, maximum and average in a separate window, e. g. for Rx, Tx, CPU load, free memory.
Monitoring of the LANCOM managed switches. Flick easily through different search results by LANCOM QuickFinder
LANmonitor
Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations, incl. Rogue AP and Rogue
Client visualization. LANCOM QuickFinder as search filter that reduces the view to devices with matching properties
WLANmonitor
Graphical user interface for configuring the object-oriented firewall in LANconfig: Tabular presentation with symbols for rapid understanding of
objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default objects for common scenarios, individual
object definition (e.g. for user groups)
Firewall GUI
Voluntary automatic updates for LCMS. Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server
(myLANCOM account mandatory). Updates can be applied directly after the download or at a later time
Automatic software update
Management
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system
overview, syslog and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration,
security, Internet access, LAN-LAN coupling. Online help for parameters in LCOS menu tree
WEBconfig
LANCOM L-320agn Wireless
Features as of: LCOS 8.82 ( > REL. D)