. . .
The outdoor router LANCOM OAP- 321- 3G has a built- in HSPA+ module and 802.11n wireless LAN. On cellular networks the router achieves data rates of up to 21 Mbps downstream and 5.76 Mbps upstream.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x WLAN Frequency band 2.4 GHz or 5 GHz 2400- 2483.5 MHz (ISM) or 5150- 5825 MHz (depending on country- specific restrictions) Data rates 802.11b/g 54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b Data rates 802.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x IEEE 802.11n Features MIMO MIMO technology is a technique which uses multiple transmitters to deliver multiple data streams via different spatial channels. LANCOM uses a 3 x 3 MIMO Configuration where 2 data streams are spread over 3 transmitters. Depending on the existing RF conditions the throughput is doubled with MIMO technology 40 MHz Channels Two adjacent 20 MHz channels are combined to create a single 40 MHz channel.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x Security URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x VPN LANCOM Dynamic VPN Enables VPN connections from or to dynamic IP addresses. The IP address is communicated via the ICMP or UDP protocol in encrypted form. Dynamic dial- in for remote sites via connection template Dynamic DNS Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the VPN connection Specific DNS forwarding DNS forwarding according to DNS domain, e.g.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x Routing functions Router IP and NetBIOS/IP multi- protocol router Advanced Routing and Forwarding Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x Management WEBconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system overview, syslog and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration, security, Internet access, LAN- LAN coupling.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x Hardware Reset button Configurable reset switch for resetting and booting the device Environment @ 10 V DC input voltage: - 33°C to 55°C, @ 24 V DC input voltage: - 33°C to 70°C Housing Robust metal housing, IP 66 protection rating, ready for wall and pole mounting, 3 LEDs for status display, please note: device must not be mounted in salt water environments without a suitable protective housing Power consumption (max) max.
LANCOM OAP-321-3G Scope of features: as of LCOS version 8.5x Accessories External antenna AirLancer Extender O- 360- 3G 4 dBi omnidirectional GSM/GPRS/EDGE/3G outdoor antenna, item no. 61225 Antenna cable AirLancer cable NJ- NP 3m antenna cable extension for connection with LANCOM outdoor antennas, item no. 61230 Antenna cable AirLancer cable NJ- NP 6m antenna cable extension for connection with LANCOM outdoor antennas, item no.
