Datasheet

LANCOM OAP-3G
Scope of features: as of LCOS version 8.5x
Scripting Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or
connection establishment and termination to run scripts for automation. Scripts can send e-mails with various command line
outputs as attachments
Load commands LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the
command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new
version is available. In addition, LoadFile allows the upload of files including certificates and secured PKCS-12 containers
SNMP SNMP management via SNMPv2, private MIB exportable by WEBconfig, MIB II
Timed control Scheduled control of parameters and actions with CRON service
Diagnosis Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
SYSINFO SYSINFO provides additional information. Hash value for the current configuration, time stamp of the last configuration change,
a persistent counter of the number of configuration changes and the output of the value CONFIG_STATUS
Statistics
Statistics Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a
billing period. Timed (CRON) command to reset all counters at once
Export Accounting information exportable via LANmonitor and SYSLOG
Hardware
Dimensions 255 mm x 250 mm x 80 mm (LengthWidth/Height)
Weight approximately 2.787 kg including pole mounting material
LED display 5 LEDs for Power, Ethernet 1, Ethernet 2, 3G and VPN
Power supply 10-28 V DC input voltage, optionally available: 24 V DC power supply unit LANCOM OAP-320 PSU
Reset button Configurable reset switch for resetting and booting the device
Environment @ 10 V DC input voltage: -33°C to 55°C,
@ 24 V DC input voltage: -33°C to 70°C
Housing Robust metal housing, IP 66 protection rating, ready for wall and pole mounting, 3 LEDs for status display, please note: device
must not be mounted in salt water environments without a suitable protective housing
Power consumption (max) max. 7.5 Watt
Declarations of conformity
CE EN 55022, EN 55024, EN 60950
Package content
Manual Hardware Overview (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD Data medium with firmware, management software (LANconfig, LANmonitor, WLANmonitor) and documentation
Plug 5-pin plug to connect with power supply cable (Information which are necessary to design your individual power supply cable
can be taken from the Quick Reference Guide of this product.)
Cable Water-resistant, UV-resistant Ethernet PoE cable with water-resistant screw connector, 15m
Mounting Kit Mounting kit for wall and pole mounting
Antennas Two 2 dBi dipole UMTS/GPRS antennas (850-960 Mhz and 1700-2220 Mhz)
GPS antenna Passive GPS antenna can be ordered free of charge with enclosed voucher
Support
Warranty 3 years
Support via Hotline and Internet KnowledgeBase
Software updates Regular free updates (LCOS operating system and LANCOM Management System) via Internet
Options
VPN LANCOM VPN-25 Option (25 channels), item no. 60083
LANCOM Content Filter LANCOM Content Filter +10 user, 1 year subscription
LANCOM Content Filter LANCOM Content Filter +25 user, 1 year subscription
LANCOM Content Filter LANCOM Content Filter +100 user, 1 year subscription
LANCOM Content Filter LANCOM Content Filter +10 user, 3 year subscription
LANCOM Content Filter LANCOM Content Filter +25 user, 3 year subscription
Management