Datasheet

LANCOM IAP-3G
Scope of features: as of LCOS version 8.5x
HTTPS Server Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server
Security Access rights (read/write) over WAN or LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list
Scripting Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or
connection establishment and termination to run scripts for automation. Scripts can send e-mails with various command line
outputs as attachments
Load commands LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the
command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new
version is available. In addition, LoadFile allows the upload of files including certificates and secured PKCS-12 containers
SNMP SNMP management via SNMPv2, private MIB exportable by WEBconfig, MIB II
Timed control Scheduled control of parameters and actions with CRON service
Diagnosis Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
SYSINFO SYSINFO provides additional information. Hash value for the current configuration, time stamp of the last configuration change,
a persistent counter of the number of configuration changes and the output of the value CONFIG_STATUS
Statistics
Statistics Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a
billing period. Timed (CRON) command to reset all counters at once
Export Accounting information exportable via LANmonitor and SYSLOG
Hardware
Dimensions 207 mm x 148 mm x 44 mm (Length/Width/Height)
Weight approximately 1.2 kg excluding mounting material
LED display 5 LEDs for Power, Ethernet 1, Ethernet 2, 3G and VPN, 3 LEDs for 3G signal strength
Power supply 12 V DC, external power adapter (230 V) with bayonet cap to protect against accidentally unplugging
Power supply 24 V DC, input voltage range 10 - 28 V
Reset button Configurable reset switch for resetting and booting the device
Environment Temperature range -20 – +50°C; humidity 0–95%; non-condensing, please note that depending on the intended use your power
supply has to support the extended temperature range
Housing Robust metal housing, IP 50 protection rating, ready for wall, pole and top-hat rail mounting
Power consumption (max) @12 V: 6.2 Watt
@ 24 V: 6.7 Watt
Declarations of conformity
CE EN 55022, EN 55024, EN 60950
UL UL-2043
Package content
Manual Hardware Overview (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD Data medium with firmware, management software (LANconfig, LANmonitor, WLANmonitor) and documentation
Cable Serial configuration cable, 1.5m
Cable 1 Ethernet cable, 3 m
Plug 2-pin plug to connect with multi voltage power supply unit with screwed connection
Mounting Kit Mounting kit for wall, pole and top hat rail mounting
Antennas Two 2 dBi dipole UMTS/GPRS antennas (850-960 Mhz and 1700-2220 Mhz)
GPS antenna Passive GPS antenna can be ordered free of charge with enclosed voucher
Power supply unit External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from
-5 to +45°C, LANCOM item no. 110723 (EU)/LANCOM item no 110829 (UK)
Support
Warranty 3 years
Support via Hotline and Internet KnowledgeBase
Software updates Regular free updates (LCOS operating system and LANCOM Management System) via Internet
Management