Datasheet

LANCOM 1780EW-3G
Scope of features: as of LCOS version 8.2x
General Detailed settings for handling reassembly, PING, stealth mode and AUTH port
URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters. Extended functionality with Content Filter Option
Password protection Password-protected configuration access can be set for each interface
Alerts Alerts via e-mail, SNMP-Traps and SYSLOG
Authentication mechanisms EAP-TLS, EAP-TTLS, PEAP, MS-CHAP, MS-CHAPv2 as EAP authentication mechanisms, PAP, CHAP, MS-CHAP and MS-CHAPv2
as PPP authentication mechanisms
WLAN protocol filters Limitation of the allowed transfer protocols, source and target addresses on the WLAN interface
Adjustable reset button Adjustable reset button for 'ignore', 'boot-only' and 'reset-or-boot'
IP redirect Fixed redirection of any packet received over the WLAN interface to a dedicated target address
High availability / redundancy
VRRP VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby
groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities
FirmSafe For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates
UMTS backup In case of failure of the main connection, a backup connection is established over the internal UMTS modem; automatic return
to the main connection
Analog/GSM modem backup Optional operation of an analog or GSM modem at the serial interface
Load balancing Static and dynamic load balancing over up to 2 WAN connections. Channel bundling with Multilink PPP (if supported by network
operator)
VPN redundancy Backup of VPN connections across different hierarchy levels, e.g. in case of failure of a central VPN concentrator and re-routing
to multiple distributed remote sites. Any number of VPN remote sites can be defined (the tunnel limit applies only to active
connections). Up to 32 alternative remote stations, each with its own routing tag, can be defined per VPN connection. Automatic
selection may be sequential, or dependant on the last connection, or random (VPN load balancing)
Line monitoring Line monitoring with LCP echo monitoring, dead-peer detection and up to 4 addresses for end-to-end monitoring with ICMP
polling
VPN
IPSec over HTTPS Enables IPsec VPN based on TCP (at port 443 like HTTPS) which can go through firewalls in networks where e. g. port 500 for
IKE is blocked. Suitable for client-to-site connections (with LANCOM Advanced VPN Client 2.22 or later) and site-to-site
connections (LANCOM VPN gateways or routers with LCOS 8.0 or later). IPSec over HTTPS is based on the NCP VPN Path Finder
technology
Number of VPN tunnels 5 IPSec connections active simultaneously (25 with VPN-25 Option), unlimited configurable connections. Configuration of all
remote sites via one configuration entry when using the RAS user template or Proadaptive VPN. Max. total sum of concurrently
active IPSec and PPTP tunnels: 5 (25 with VPN 25 Option)
Hardware accelerator Integrated hardware accelerator for 3DES/AES encryption and decryption
Realtime clock Integrated buffered realtime clock to save the date and time during power failure. Assures timely validation of certificates in any
case
Random number generator Generates real random numbers in hardware, e. g. for improved key generation for certificates immediately after switching-on
1-Click-VPN Client assistant One click function in LANconfig to create VPN client connections, incl. automatic profile creation for the LANCOM Advanced
VPN Client
1-Click-VPN Site-to-Site Creation of VPN connections between LANCOM routers via drag and drop in LANconfig
IKE IPSec key exchange with Preshared Key or certificate
Certificates X.509 digital multi-level certificate support, compatible with Microsoft Server / Enterprise Server and OpenSSL, upload of
PKCS#12 files via HTTPS interface and LANconfig. Simultaneous support of multiple certification authorities with the
management of up to nine parallel certificate hierarchies as containers (VPN-1 to VPN-9). Simplified addressing of individual
certificates by the hierarchy's container name (VPN-1 to VPN-9). Wildcards for certificate checks of parts of the identity in the
subject. Secure Key Storage protects a private key (PKCS#12) from theft
Certificate rollout Automatic creation, rollout and renewal of certificates via SCEP (Simple Certificate Enrollment Protocol) per certificate hierarchy
Certificate revocation lists (CRL) CRL retrieval via HTTP per certificate hierarchy
XAUTH XAUTH client for registering LANCOM routers and access points at XAUTH servers incl. IKE-config mode. XAUTH server enables
clients to register via XAUTH at LANCOM routers. Connection of the XAUTH server to RADIUS servers provides the central
authentication of VPN-access with user name and password. Authentication of VPN-client access via XAUTH and RADIUS
connection additionally by OTP token
RAS user template Configuration of all VPN client connections in IKE ConfigMode via a single configuration entry
Proadaptive VPN Automated configuration and dynamic creation of all necessary VPN and routing entries based on a default entry for site-to-
site connections. Propagation of dynamically learned routes via RIPv2 if required
Algorithms 3DES (168 bit), AES (128, 192 or 256 bit), Blowfish (128 bit), RSA (128 or -448 bit) and CAST (128 bit). OpenSSL implementation
with FIPS-140 certified algorithms. MD-5 or SHA-1 hashes
NAT-Traversal NAT-Traversal (NAT-T) support for VPN over routes without VPN passthrough
Security