SDS

RC-886 - WHITE SEAL PLUS
Safety data sheet
according to 29 CFR 1910.1200
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)
Explosive properties:
Non-applicable *
Oxidising properties:
Non-applicable *
Flammability:
Flash Point:
Non Flammable (>199.4 ºF)
Flammability (solid, gas):
Non-applicable *
Autoignition temperature:
473 ºF
Lower flammability limit:
Non-applicable *
Upper flammability limit:
Non-applicable *
Explosive:
Lower explosive limit:
Non-applicable *
Upper explosive limit:
Non-applicable *
9.2
Other information:
Surface tension at 68 ºF:
Non-applicable *
Refraction index:
Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY
10.1
Reactivity:
No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7.
10.2
Chemical stability:
Chemically stable under the conditions of storage, handling and use.
10.3
Possibility of hazardous reactions:
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.
10.4
Conditions to avoid:
Applicable for handling and storage at room temperature:
Shock and friction
Contact with air
Increase in temperature
Sunlight
Humidity
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
10.5
Incompatible materials:
Acids
Water
Oxidising materials
Combustible materials
Others
Avoid strong acids
Not applicable
Not applicable
Not applicable
Avoid alkalis or strong bases
10.6
Hazardous decomposition products:
See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions,
complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic
compounds.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1
Information on toxicological effects:
The experimental information related to the toxicological properties of the product itself is not available
Dangerous health implications:
In case of exposure that is repetitive, prolonged or at concentrations higher than recommended by the occupational exposure
limits, it may result in adverse effects on health depending on the means of exposure:
A-
Ingestion (acute effect):
- Acute toxicity : Based on available data, the classification criteria are not met, as it does not contain substances classified
as dangerous for consumption. For more information see section 3.
- Corrosivity/Irritability: Based on available data, the classification criteria are not met, as it does not contain substances
classified as dangerous for this effect. For more information see section 3.
Page 6/9
Date of compilation: 10/29/2019 Version: 1
- CONTINUED ON NEXT PAGE -