Specification

SILICONIZER™
RC–200
100% ELASTOMERIC ULTRA WHITE SEALER
STYRENE/ACRYLIC SILICONE-MODIFIED ROOF COATING
PRODUCT
DESCRIPTION: A professional grade, ultra-white, elastomeric roof sealer that will provide
a weatherproof seal, and adhere to porous substrates and aged metal
roofs. In most cases Siliconizer does not require a primer.
BASIC USES: A heat-reflective elastomeric coating formulated to protect and waterproof a
wide variety of structurally sound roofing substrates, including conventional
bituminous built-up roofs, asphalt, aged metal, wood, concrete,
and asphalt shingle roofs
.
PRODUCT
ADVANTAGES: * 100% elastomeric * Elongation (ASTM D 412)
* Waterproofs / seals substrate * Lightweight
* Ultra white * Heat-reflective
* Algae / mildew resistant * Prevents leaks
TECHNICAL DATA
Pe Percent Solids: 47.00 ± 1% by weight Finish Flat (5º–10º)*
36.00 ± 1% by volume *Geometry 60º
W Weight/ Gallon: 10.10 ± 0.5 Viscosity 110-115 Ku's 110-115 Ku’s
Color: Ultra white Percent Pigment
by Weight 21.00 ± 1%
Fl Flash Point: Non-flammable
Dr Drying Time: To touch: 1 hour Recommened
To recoat: 24 hours Coverage: Metal 50 sq.ft./gal.
Wood 50 sq.ft./gal.
Siz Sizes: 5 gallons Cement 50 sq.ft./gal.
1 gallon Built-up roofs 50 sq.ft./gal.
Asphalt shinges 50 sq.ft./gal.
Re Recommended
Fil Film Thickness
@
@ 50 sq.ft./gal:15 mils dry, 32 mils wet.
Th Thinning: Normally not recomended.if necessary, add up to 10% water maximum.
ssa rev 8/10 (US) P. 35