TDS

T E C H N I C A L D A T A S H E E T
www.lancopaints.com
continued on back
Dry Coat (DC-480)
Smooth Hydrophobic Acrylic Latex Flat
Description
Lanco
®
Dry Coat™ is a high performance
alkali resistant waterproofing paint, based
on a revolutionary new technology of ultra-
small particle size hydrophobic latex
designed to waterproof a wide variety of
surfaces. ULTRA WHITE, ready mix paint
tintable to pastel, tint, deep and accent
colors using Lanco
®
Color Express System.
Product Advantages
• Eliminates leaks & moisture
• Durable and tough
• Chalk resistant
• Mildew and stain resistant
• Excellent coverage
• Easy to clean
• Excellent color retention
• Lead-free
• No residual toxicity
• Will not peel or blister under extreme
conditions
Product Uses
Exterior or Interior Surfaces: ideal for high-
rise apartments and condominiums, tilt-up
warehouses, hospitals, schools, concrete
parking garage overheads, hotels, resorts
and residential homes. Use on new or
previously coated concrete, stucco, cement
block, masonry, properly prepared brick,
fiber cement siding, EIFS exterior wall
cladding.
Technical Data
SOLIDS: 58.0 ± 1% by weight
39.0 ± 1% by volume
V.O.C LEVEL: 77 g/L
WEIGHT / GALLON: 11.87± 0.5 lbs.
FINISH: Flat (5º-10º)*Geometry 60º
FLASH POINT: Non-flammable
FIRE RATING: Class A
VISCOSITY: 110-115 Ku’s
SUGGESTED FILM THICKNESS, COVERAGE
PER COAT:
First Coat: 6.4 mils wet, 2.5 mils dry
225-275 sq ft/ gal
Second Coat: 6.4 mils wet, 2.5 mils dry
225-275 sq ft/ gal
*Coverage figures do not include surface
porosity, irregularities & material loss due to
application methods.
Base & Tinting Information
Follow tinting requirement specified within
appropriate color formula book, color
matching computer and automatic tinting
equipment.
BASE/COLOR:
DC-480
White /Paste
The use of deep tinted colors or high
contrast accent colors may require the
addition of one or more finish to achieve
acceptable coverage and hiding results.
Application
Stir or shake thoroughly before using. Read
all label and Safety Data Sheets (S.D.S.)
information prior to use. Paint always on
shaded side of the building. Do not apply in
cold, damp conditions. Avoid exterior
application late in the day when dew or
condensation is likely to form or rain is
expected. Typical standard practice
recommends intermixing when working
with more than one container of a tinted
color, to ensure color consistency.
BRUSH: Use a high quality nylon or
polyester brush.
ROLLER: Use a ½” to 1 ¼” nap roller cover,
depending on the substrate texture.
AIRLESS SPRAY: Use a tip size from .017” to
.023”. Spray application must be back rolled
to work material into surface.
MIXING: Always mix thoroughly before and
during application.
THINNING: This product is not to be
thinned.
CLEANUP: Clean all equipment
immediately after use with warm soapy
water. Completely flush all spray equipment
with this solution.
DRYING TIME@ 77
O
F @ 50% RH:
Temperature and humidity dependent.
To touch: 1 hour
To recoat: 4 hours
Technical Compliance:
AIM: PASSES
OTC: PASSES