manual

DESCRIPTION OF THE BODY STIM

A. Functions of the main unit

1. Output socket: hole for connecting the electric cable to produce the electric signal.

2. LCD screen: real-time display of the operating status of the appliance.

3. Intensity display window: real-time intensity display.

4. Intensity adjustment button (“intensity/power»): OFF scale from 1 to 10. Turn the switch clockwise to activate the

device; the intensity increases as you go up scale and decreases as you go down the scale, until the device is finally

deactivated.

5. Time selection button: makes it possible to adjust the operating time of the appliance.

6. Manual mode selection button: the appliance has six manual modes, i.e.:

• Hammering tapping

• Acupuncture acupuncture

• Naprapathy kneading

• Cupping application of suction pads (or pumping)

• Scraping Scratching

• Massage massage

Press the button once; the mode is modified in the order stated above. The LCD arrow will indicate the function mode

selected in a synchronised manner.

7. Automatic mode selection button: the automatic modes are as follows:

7.1. Auto I: Muscle development

7.2. Auto II: Figure slimming

7.3. Auto III: Neck/shoulders

7.4. Auto IV: Back/Legs

Press the button once; the mode is modified in the order stated above. The LCD arrow will indicate the automatic mode

selected in a synchronised manner.

8. Repeat button: press the Repeat button; the LCD screen will display “REPEAT”. The appliance will continue to generate

the same signals, i.e. it will maintain the same sensitivity. Press the Repeat button again; the LCD screen will no longer

display “REPEAT”. The output signals will then be modified every 15 seconds by the appliance.

[2]

[4]

[3]

[8]

[1]

[5]

[6]

[7]

[6.1]

[6.

[7.

Body Stim