Instructions / Assembly

Care and Safety Information
WARNINGS AND CAUTIONS
 Before starting the fixture installation or removing a previous fixture, disconnect the power
by turning off the circuit breaker or removing the fuse at the fuse box.
 If you have any doubts about the installation of this fixture, consult a qualified electrician.
 Carefully unpack this fixture, handle it with care and place it on a soft surface to prevent
scratching.
 Before beginning the product assembly, make sure all parts are present compared parts with
package content list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
IMPORTANT SAFETY CONSIDERATIONS
Warning: Connect green fixture wire to grounding screw in junction box.
Warning: Do not touch the steel when it is working.
Warning: Do not use any hash abrasives, detergents or anything containing ammonia to clean
your light fixture. Bulbs are not included with your light fixture, only use bulbs recommended for
your fixture.
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN
DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU!
LIGHT FIXTURE USE AND CARE
 Do not modify the light in any way.
 Unauthorized modification may impair the function and/or safety and could affect the life of
the product.
 Check damaged or worn out parts before using your light fixture. Broken parts will affect the
light fixtures operation. Rplace or repair damaged or worn parts immediately.
 When the light is mounted in one certain way, store the other mounting bases or rods in
case you decide to change how it is mounted in the future.