Manual

DATA LOGGING
The default setting for the data logger is enabled. The meter will log the
last 500 data points. The counter in the center bottom of the display will
show how many data points have been logged. The display will show
500+ when the data logger has exceeded 500 points and the data
points are being overwritten.
1. Press and briefl y hold
to turn the meter on. The
LaMotte logo screen will
appear for about 3 seconds
and the Main Menu will
appear.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
2. Press to scroll to Data
Logging.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
3. Press
ENTER
to select Data
Logging.
Logging
Display Test Log
Enable Logging
Disable Logging
Erase Log
12:00:00 001/500
4. Press
ENTER
to display the last
data point and the time that it
was logged.
Record Number 2
Turbidity - WB (F)
655 AU
12:26:58 PM 08-03-2010
12:00:00 001/500
34
Options/Set Up