Owner manual

DATA LOGGING
The default setting for the data logger is start (on). The meter will log the last 4004
data points.
1. Press ON to turn the meter on.
1.3
2. Scroll down and press *IOK to
select Data Logging.
Main Menu
Measure
* Data Logging
Options
16:02:19 01/04/05
3. Press *IOK to view the last data
point that was logged.
Data Logging
*View
Stop
Erase
16:02:19 01/04/05
4. Press  or  to scroll through the
saved data points.
304 / 304
1.58 NTU
Turbidity (F)
16:26:58 09/11/04
16:02:19 01/04/05
Note:
If the data logger is empty because it has never been used or has just been
erased, the view function will not work.
Or scroll down and press *IOK to
select Stop or Start to stop or start
the data logging feature.
Data Logging
View
*Stop
Erase
16:02:19 01/04/05
16 OPTIONS & SETUP • DATA LOGGING