Owner manual

SETTING AUTO SHUTDOWN
The power saving Auto Shutdown feature will turn the meter off when a button has not
been pushed for a set amount of time. The default setting is disabled. To change the
setting:
1. Press ON to turn the meter on.
1.3
2. Scroll down and then press *IOK
to select Options.
Main Menu
Measure
Data Logging
* Options
16:02:19 01/04/05
3. Scroll down and then press *IOK
to select A uto Shutdo wn.
Options
Turbidity
Date/Time
Language
* Auto Shutdown
16:02:19 01/04/05
4. Scroll up and then press *IOK to
select a shutdown time.
Available options are: 5minutes,
10 minutes, 30 minutes,
Disabled.
Auto Shutdown
* 5 Minutes
10 Minutes
30 Minutes
Disabled
16:02:19 01/04/05
5. Press  to exit to a previous menu
or make another menu selection or
press OFF to turn the meter off.
OPTIONS & SETUP • SET AUTO SHUTDOWN 15