Quick Guide

ManualsBrandsLAMONA ManualsDishwashersLAM8672

CONTROL PANEL

QUICK GUIDE

3 4

On/off button

Delay button

Programme buttons

Indicators

Indicator Description

End indicator.

Combi tablet indicator.

Salt indicator. It is always off while the programme operates.

PROGRAMMES

Programme

Degree of soil

Type of load

Programme phases Options

Eco

• Normal soil

• Crockery and cutlery

• Prewash

• Wash 50 °C

• Rinses

• Dry

Combi tablet

Intensive

• Heavy soil

• Crockery, cutlery, pots

and pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

Combi tablet

Normal

• Normal soil

• Crockery and cutlery

• Prewash

• Wash 65 °C

• Rinses

• Dry

Combi tablet

Quick

• Fresh soil

• Crockery and cutlery

• Wash 60 °C or 65 °C

• Rinses

Combi tablet

Rinse & Hold

• All • Prewash

Summary of content (4 pages)

PAGE 1
CONTROL PANEL 1 3 2 1 On/off button 3 Delay button 2 Programme buttons 4 Indicators 4 Indicators Indicator Description End indicator. Combi tablet indicator. Salt indicator. It is always off while the programme operates.
PAGE 2
Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. 3. Press the button related to the programme you want to start. The related programme indicator comes on. 4. Close the appliance door to start the programme. Starting a programme with delay start 1. Set a programme. 2. Press again and again until the indicator related to the number of hours want to set comes on (3, 6 or 9).
PAGE 3
OPTIONS Combi tablet Activate this option when you use multitablets that integrate the salt, rinse aid and detergent functions. They can also contain other cleaning or rinsing agents. This option deactivates the release of salt. The salt indicator does not come on. With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the use of multi-tablets. Combi tablet is not a permanent option and must be selected at every cycle.
PAGE 4
How to ﬁll the rinse aid dispenser 1. 2. 3. 4. Press the release button (H) to open the lid (G). Pour the rinse aid in the dispenser (D) until the liquid reaches the ﬁll level ‘max’. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Close the lid. Make sure that the release button locks into position. Fill the rinse aid dispenser when the indicator (F) becomes clear.