User's Manual

I Safety
Battery & Charging:
*Please make sure that the charging voltage meets the rated standard.
*Do
not use the battery, charging station or charging cable from any third parties.
*Do
not open, fix, modify the charging cable, power adapter, charging station and battery without permission.
*Do
not put Lam bot or the charging station near any heat source device including but not limited to heating radiator, induction cooker, oven and etc.
*Do
not clean or touch the charging station and the charging electrodes of Lam bot with any wet cloth.
*Do
not throw used battery about. Please send the used battery to professional recycle organization.
*Do
not use the power cable if it is broken or parted. Please contact our customer service to choose and purchase the quality cable for replacement.
*If you need to transport this product, please make sure Lam bot is power off and packaged with its original packing box,
*If you don't use Lam bot for a long time, please fully charge Lam bot and turn it off. You need to store it in a cool and dry place and charge it every
three
months to prevent over-discharge.
Laser Safety Information:
Product Executive Standard:
The laser range scanner installed in this product is subject to
<IEC 60825-l:2014(Third Edition)> standard and will not produce harmful laser lights.
EN 300328, FCC CFR47 Part 15, IEC 60335, EN55012, EN60355, EN62479, EN301489,
AS/NZS 4268, AS/NZS 60335,
EN 300 328, EN60950, EN301489-l/-l 7
LAM BOT Robotic Vacuum Cleaner
Manufacturer: Shanghai Lambot Intelligent Co., Ltd.
Address: Building C, No 888, West 2nd Huanhu Road, Nanhui New Town, Pudong New District, Shanghai, China.
2