User's Manual
Table Of Contents
I
FAQ
Question
Solution
Unable to launch.
1.
Lam
bot
gets
low
battery. Please fully charge
it
before using.
2.
Extreme battery temperature. Please
use
Lam
bot
within
the
temperature range
of
0°C-40°C.
Unable to charge.
1.
Charging staion
is
not
powered on. Please make sure
that
the power cable
is
connected properly.
2. Charging electrodes are in
poor
contact. Please clean the electrodes on Lam
bot
and
the
charging station.
Unable to go back to the charging Please make sure
that
there are enough space around
the
charging station and its recognition zone
is
clean.
station.
You
need to
put
Lam
bot
on
the
charging station before operating it,
or
it
cannot go back to the charging station.
Unable to discover Lam
bot
via mobile
application.
Please reset the
WiFi
of
Lam bot. Enable the Bluetooth on
your
smart phone and keep
it
close
to
Lam bot.
Unable to bind
Lam
bot
with
mobile Please make sure
the
charging station and Lam
bot
are in
an
area
with
consistent and strong
WiFi
coverage,
application. and then reset
the
WiFi
of
Lam
bot
and rebind
it
with
your
smart
phone.
Lam
bot
is always offline. Please make sure
that
the network
is
set properly and Lam
bot
keeps in
the
area
of
consistent WiFi coverage.
There
is
abnormal noise during sweeping.
Please remove
the
tangled
stuff
on
the
main brush, side brush and wheels and clean the bottom
of
Lam
bot
and
its impact bar.
Lam
bot
moves slowly.
Please clean
the
ultrasonic sensor mesh cover in the middle
of
the
impact bar and make sure
the
mesh holes
are clean and free from any blocks.
Decline in
the
ability to sweep. Please
empty
the
dust bin and clean
the
main brush and
the
filter. Replace
the
filter
if it
is blocked.
Scheduled task will
not
start
if
Lam
bot
gets
low
battery. Please fully charge Lam
bot
before use it. Scheduled task will
Unable to start scheduled task.
not
be synchronized between
your
smart
phone and Lam
bot
if
Lam
bot
is
disconnected from network. Please keep
Lam
bot
on line.
Is
it
required to
power
off
the
Lam
bot
consumes a small
amount
of
power during its stand-by time. Therefore,
to
keep Lam
bot
running
at
peak
performance, you can always keep
it
charged on
the
charging station
to
ensure
it
is
ready for its next sweeping task.
charging station after fully charging
While during storage for long term, Lam
bot
should
be
powered
off
and
the
charging station should
be
disconnected
Lam bot?
from power.
Is
it
required to charge Lam
bot
for
Lam
bot
has
a high-performance Lithium Ion battery pack installed. The battery
is
free from
memory
effect, so
24 hours
for
the
first
time
to use it? you
don't
need
to
wait
for
24 hours
to
fully charge
it
for
the first
time
you
use
it.
Is
the laser lights emitted from
Lam
bot
adopts the advanced and safe laser range scanner (Lidar).
Lidar harmful
to
human body? It reaches Class I laser safety standard, which ensures its safety
to
human and pet.
25