User's Manual

I Maintenance
Sensors
Clean the dust and dirty stuff on the surface of all the
sensors with a
dry and soft cloth.
Sensors:
1.Wall-following Sensor
2.Ultrasonic
Range Sensor
3.Cliff Sensors
4.Laser
Range Scanner
20
Firmware Upgrade
In the Lambot mobile application, go to the device setting
page and you can check the latest firmware update and update
it as you like. Please keep Lam bot been charged and the
battery
is not lower than 60% when you are updating the
firmware for it. Please refer
to the update instruction in
the
Lam bot mobile application for details.
Reset System
If you cannot get any responses when pressing the buttons on
Lam bot, you can reset the whole system by force via the system
reset button.
Lam bot Lid
System Reset Button