USER MANUAL FOR LAMBOT ROBOTIC VACUUM CLEANER Please read this user manual carefully before using Lam bot and then keep it properly.
I Welcome to Lam bot Thank you for choosing LAM BOT Robotic Vacuum Cleaner! Lam bot is an intelligent vacuum robot with autonomous localization and navigation ability. With its bright eyes (the laser range scanner) and brilliant brain (the core algorithm chip), it explores its surrounding environment automatically and plans the best path for cleaning. Meanwhile, it keeps the areas where it has cleaned in mind and will load the maps of those areas quickly in its next task.
I Table of Contents • • • • • • • • • • • • • • • Safety 1 FCC Caution 4 CE Certification 5 Unpacking 6 About Your Lambot 7 Preparation 11 Install mop module 12 Instruction 13 Maintenance 16 Tips 21 Specification 22 ------------------------------------------ 22 Troubleshooting ---------------------------------------------------------------------- 23 FAQ ---------------------------------------------------------------------- 25 Hazardous Su bsta nee Report Warranty 26
I Safety Usage Restrictions: 'Your robot is for home environment use only. Please do not use it in outdoor environment (open balcony), non-ground environment (sofa, dining-table, tea table and etc.), business places and industrial environment. 'Do not use Lam bot in the environment where it may fall down and cause bodily injury and property damage (such as the top of some furniture, loft house and etc.). 'The operating temperature range of Lam bot is 0°C-40°C.
I Safety Battery & Charging: *Please make sure that the charging voltage meets the rated standard. *Do not use the battery, charging station or charging cable from any third parties. *Do not open, fix, modify the charging cable, power adapter, charging station and battery without permission. *Do not put Lam bot or the charging station near any heat source device including but not limited to heating radiator, induction cooker, oven and etc.
I Safety LAM BOT Robotic Vacuum Cleaner Performance Issue List LAM BOT Robotic Vacuum Cleaner Performance Issue List Part Name Lam bot I Performance Issue Functions listed in this manual unavailable Unable to launch Main brush, side brushes, vacuum fan or driving wheels cannot work normally Charging Station Unable to charge Lam bot vacuum robot normally Charging Cable Unable to provide power supply for charging station normally Quality Certificate Company Name: Shanghai Lam bot Intelligent Co.
I FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
I CE Certification This product can be used across EU member states RED Declaration of Conformity The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, Shanghai Lambot Intelligent Co., Ltd. Corporation, declares that the radio equipment type(product name:Lambot「obotic vacuum cleaner, modle:LBPWVEU2)is in compliance with Directive 2014 /53 /EU.The full text of the EU declaration of conformity isavailable at the following internet add「ess: www.lambot.
1.Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 2.CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS. 3.The product shall only be connected to a USB interface of version USB2.0. 4.Adapter shall be installed near the equipment and shall be easily accessible. 5.Operation temperature:-10~40ºC.
I Unpacking When you unpack the product box, you will find the following parts and accessories. Please check whether they have been included in the box.
I About Your Lam bot Lambot Dock Button: • Short press to recharge or pause • Long press for spot sweeping 0 WiFi Indicator: • Slow flash:Waiting forWiFi • connection • Keep on:WiFi connection success • Quick flash:WiFi connection failed Power Button: • Short press to start or pause cleaning 0 • Long press to power on or off u Open Lam bot Lid Here Power Indicator: • White light:>= 20% • Red light: < 20% • Breathing flash: Charging • Red flash: Error 。 When Lam bot is on, press down the power butto
I About Your Lam bot Lambot Dust Bin Lam bot Lid ~ - - - - - ~o - -~ - - - - - - - - - - - - - - - - - ,d~,,.,-------:~ - ----o .
I About Your Lam bot Top View Bottom View Cliff Sensors Air Outlet Loudspeaker Mecanum Wheel Side Brushes Battery Compartment Main Brush Lidar bumper Main Brush Frame Laser Range Scanner Driving Wheels Air Filter Ultrasonic Range Sensor Impact Sensor Wall-following Sensor 9
I About Your Lam bot Charging Station Recognition Zone ------111c-------r--~ Charging Electrode Cable Outlet Cable Slot Back Lid (Could be used as support frame) Power Cable .
I Preparation 01 02 Power Cable Connection and Put in Order *Put the overlong part of the power cable into the cable channel in case the cable disconnects from the charging station due to dragging by the moving Lam bot. Install side brush components 04 Install both side brushes on the bottom, regardless of left or right. 05 Install Mobile Application and Bind Your Lambot Place the Charging Station and Connect It to Power *Place the charging station against a wall and ensure there is at least 0.
I Install mop module Filling Water Mount Mop Component Take out two-in-one water box from the Lam bot. Open the Push the component along the bottom side of the Lam bot, water box lid and filling water. Then close the lid and put it until it's locked. back to the Lam bot. The Lam bot will say, "Water mop is mounted." Mount Mop Wet out the mop and wring it out, then mount it to the mop plate. The Lam bot will work in "Mop Mode" with mop component mounted.
I Instruction Power On/Off 1. Lam bot will automatically go back to the charging station after finishing 1. Lam bot will automatically power on after docking to the charging all the sweeping tasks. If it cannot find the way back, please take it back station. to the charging station manually. 2. Lam bot cannot power off while docking to the charging station. 2. If the battery gets lower than 20%, Lam bot will automatically go back to 3.
I Instruction Network Configuration 3.The phone should connect the WIFI and enable Bluetooth. Pairing the Device Then add a new Lam bot in Lam bot APP. Choose the WIFI !.Download and install the Lam bot APP by scanning the QR SSID your phone connected, and input the right WIFI password. code or searching from APP store. Open the Lam bot APP and prepare to add a new Lam bot. WIFl-2AG Password ------- 0------- d 0 2.Press down the power button and the dock button for at least 3 seconds.
I Instruction Sweep There are two ways to make Lambot start sweeping: Area One: Swept Area Two: Swept 1. Short press the power button on Lam bot to start a sweep task. 2. In the Lam bot mobile application, go to the device page and ( ( ) click Sweep button to start a sweep task. ( ( ) ) ( Sweep Plan: ( ( Lam bot automatically explores its surrounding environment, ( ) ( ( builds a map for it and divides the map into several sweeping areas.
I Maintenance Main Brush Side Brush 1. Turn Lam bot upside down, press the clip to take the main l.Turn Lam bot upside down and remove the two side brushes; brush frame down; 2.Clean the side brushes; 2. Take the main brush down; 3.Clean the tangled things on the side brush axles; 3. Clean the main brush slot; 4.Reinstall the side brushes. Please ensure that they are 4. Clean the main brush axle; installed properly since the left side brush is different. Main Brush Frame from the right one.
I Maintenance Dust Bin and Filter 1. Open the Lambot lid; 4.Empty the dust bin; 2. Take the dust bin out; 5.Wash the dust bin and the filter with water; 6.Ensure the dust bin and the filter are dry and then reinstall 3.0pen the dust bin lid; them into Lambot. • To ensure the best cleanning performance, the filter should be replaced every 6-12 months. Or you can follow the replacement notice in the Lam bot mobile application. •clean HEPA with water is not allowed.
I Maintenance Two-In-One Water Box Recommend to clean it each time 4.Empty the water. 1. Take outTwo-ln-On Water Box. 2. Take out embedded dustbin, and clean it. ·Don't clean the HEPA with water. 5.Take down the mop from the plate. Clean it with water and dry it before next use. 3. Open the water box lid.
I Maintenance Battery Charging Electrode Lam bot has a high-performance Lithium Ion battery pack After disconnecting from power, clean the electrodes on installed. The battery is free from memory effect, so you the charging station and Lam bot with a dry and soft cloth. don't need to worry about the repeated charge-discharge issue. For best experience, while Lam bot is idle, please also keep Lam bot charged on the charging station to ensure that it is ready for its next sweeping task.
I Maintenance Sensors Firmware Upgrade Clean the dust and dirty stuff on the surface of all the In the Lambot mobile application, go to the device setting sensors with a dry and soft cloth. page and you can check the latest firmware update and update it as you like. Please keep Lam bot been charged and the Sensors: battery is not lower than 60% when you are updating the 1.Wall-following Sensor firmware for it. Please refer to the update instruction in 2.
I Tips -b *Before running the robot, please pick up the small objects and power cables or any other stuff which may affect the performance of Lam bot. *Before running the robot, please make sure all fragile, unsteady, valuable or dangerous objects are taken in well, or it may cause bodily injury and property damage. X *If there is stairs or holes in the working environment of Lam bot, please use physical barriers to protect Lam bot from falling, or it may cause bodily injury and property damage.
I Specification Charging Station Lambot Item Parameter Dimensions 350 x 350 x 96mm Battery Capacity Item Parameter Dimensions 208.6 x 118.3 x 58mm 5200mAh Rated Voltage 30W Weight 3.4kg Rated Input 100-240V~ S0/60Hz Wireless Connection Wi-Fi, bluetooth Rated Output 24V ::-::-:: 1.SA Rated Frequency 50/60Hz Rated Voltage 14.
I Troubleshooting If your Lam bot does not work as expected, its power button will light up with quick red flash. Please check the following table or follow the instructions in Lam bot mobile application for solutions. No. Exception Message Solution 1 Lidar error. The Lidar gets stuck or obscured. Please remove the obstacles, put Lam bot back on the charging station and relaunch it. 2 Impact sensor error. The impact sensor gets stuck. Please pat the impact bar several times to recover its position.
I Troubleshooting No. Exception Message Solution 15 Localization lost Lambot will try to relocalize itself.
I FAQ Question Unable to launch. Solution 1. Lam bot gets low battery. Please fully charge it before using. 2. Extreme battery temperature. Please use Lam bot within the temperature range of 0°C-40°C. Unable to charge. 1. Charging staion is not powered on. Please make sure that the power cable is connected properly. 2. Charging electrodes are in poor contact. Please clean the electrodes on Lam bot and the charging station. Unable to go back to the charging station.
n C rl- 0.. 0 :a'::::,: I Warranty rl- ::r (D :a': Q) ~ nl ::::, "2" According to the Law of the People's Republic of China on the Protection of the Rights and Interests of Consumers and the Product Quality Law of the People's Republic of China, Lam bot vacuum robot provides repair, replacement and return services in its after-sales service. The service covers the following items: n Q) Warranty Period Q) 1.
I Warranty 4. Performance issue not listed in the Lam bot Vacuum Robot Performance Issue List; 5. Performance issue of Lam bot and its parts listed in the Lam bot Vacuum Robot Performance Issue List but resulting from human-made causes. Warranty Card User Name Address Phone Number Product Name and Model Number Serial Number Purchase Date Maintenance Record Date Problem Description & Parts Replacement 1 2 3 Our Customer Service Email: support@lambot.
