Operation Manual
- 7 -
9. Quick Capture – when activated, the camera automatically begins recording imme-
diately after it is switched on.
10. Video Stamp – this option enables the date and time to be displayed on the nal
video.
11. Loop Record – when activated, the camera records videos of a predetermined
length. When the memory card is full the most recent recordings are recorded over
the oldest ones.
12. Photo Stamp – this option enables the date and time to be displayed on the nal
image.
13. Time-lapse Video – when enabled, the camera captures images at preset intervals,
allowing you to create attractive time-lapse shots.
14. Self Timer – when activated, it creates a time delay between pressing the “SHUTTER”
and the being taken in photo mode.
15. Photo Burst – when activated the camera captures the set number of photos in rapid
succession with just a single press of the “SHUTTER” button.
16. Delay O – after disconnecting the camera from the external power, the camera does
not turn o immediately but continues to record for another 30 seconds.
17. TV Mode – NTSC is the American standard and PAL the European standard. The most
obvious dierence is the number of frames per second (e.g. NTSC/PAL 30 fps/25 fps
or 60 fps/50 fps).
18. Light Frequency – allows you to select the frequency in accordance with the fre-
quency of the grid (on the European continent the network frequency is 50 Hz, in the
Americas and parts of Asia it is 60 Hz).
19. TV Out – enables/disables the output to a television.
20. WiFi LED – turns on/o the LED WiFi connection indicator.
21. Beep – turns on/o the sounds made when pressing the buttons.