Instructions
7
Manual or automatic adjustment of camera display brightness.
When the manual option is selected, a brightness bar appears
on the main screen. To adjust the brightness, touch the + and -
buttons.
Sets the screen to turn off automatically when the camera is not
being operated. The time interval is 1–3 minutes, or the power
save mode can be switched off completely. LCD auto power off
functions even when the camera is recording. Touch to reactivate
the display.
Adjusts the camera exposure to optimize video brightness.
Allows you to switch on or off the key sound and the welcome
tone.
Sets whether to display date on the video.
Sets whether to display speed on the video.
Sets whether to display GPS coordinates on the video.
Sets the current date and time. If you have a GPS module co-
nnected to the camera, the date and time will be set automati-
cally. Press the Set Time / Date button to enter the settings and
use the arrows to set the individual sections (day, month, year,
hours, minutes and seconds). You must confirm each setting
with OK.
In this setting you can change the time zone.
Sets the speed unit in the camera.
Allows you to turn off the Voice Control function.
Allows you to reset the camera settings to factory settings.
This will delete all photos and videos on the camera. Attention,
this includes all protected files!
Learn about the currently installed firmware version.
For proper operation, the ADAS must be calibrated directly in a lane with the horizontal markings defining
the lane. For safety reasons, we recommend that your passenger assists you or you can calibrate it in a
stopped car on an empty road so that you do not limit or endanger yourself or the surrounding traffic. Never
operate the camera whilst driving!
When ADAS is on, the calibration icon appears on the left side of the main screen display. After pressing and
confirming the selection, the display shows calibration lines.
To calibrate, position the camera lens so that the lateral calibration lines overlap with the road lane lines and
the calibration cross points to the road horizon. When the camera determines that the calibration has been
successful, it displays a message.