Operation Manual

- 2 -
Product installation
1) Connect the power cable to the cigarette lighter. Ensure the cable is placed around the wind-
screen so as not to obstruct the driver's view and then x it securely in place. Attach the device
between the glass and the mirror. This will give you the optimal picture.
2) Do not install in a position which obstructs the driver's view or distracts them.
3) Some vehicles continue to supply power to the cigarette lighter, even when the engine is turned
o. In this case, before leaving the vehicle, unplug the cable from the cigarette lighter.
4) When using the device for the rst time, the battery may be low. If you cannot switch on the
device due to low power, manually connect the external power cable to charge the battery.
5) Use only a high-quality micro SDHC card of class 10 or higher. For optimal recording use, we
recommend cards with a capacity of at least 8GB up to a maximum of 32GB. If this is the rst use
of the card, we recommend formatting it rst.
Quick functions
1) LED light – tap the “ON/OFF” button
2) Parking mode – tap the “PARKING MODE” button
3) Video audio – tap the “UP” arrow
4) File lock – when recording video, lock the current recording by tapping the “MODE” button.
Icons annotation
Lenght of the loop Exposure Value
Video Mode Photo Mode
Voice ON Voice OFF
Image stabilisation Camera is Powered
LED light Memory Card Detected
Photo Quality Photo Burst
Sensitivity Motion Detection
Parking Mode