Manual

17
CERTIFICATION OF FACTORY VERIFICATION
AIRCRAFT BATTERY CHARGER / DISCHARGE TESTER
MODEL: CA-1550 MIL P/N: 4159 MIL
MFD. BY: Lamar Technologies LLC
14900 40th Ave NE
Marysville, WA 98271
Cage Code #: 3RCD2
Tel: [phone] Fax:
415-883-6302 E-Mail:
[e-mail]
AC INPUT: 50/60 HZ 115 V 14A MAX., 230 V 7A MAX.
DC OUTPUT: CHARGE 0-25A
DISCHARGE: 0-50A MAX
Refer to Operating Instructions for more complete specifications.
Standards Used Traceable to National Institute of Standards and Technology (NIST)
Calibrated Instruments:
a) Digital Multimeter Fluke 8010A
b) Digital Multimeter Fluke 73III
c) Oscilloscope, Leader model LS1020
d) Shunt 100A 100MV EMPRO (OHMIC VALUE = .00100 OHMS)
Auxiliary Non-Calibratable Equipment Used:
Batteries: NiCad Super 17 20 Cell Marathon
Lead Acid RG380E 24V Concorde
Load Bank 1-100 AMP. Power Products
Power Products Factory Test Report / Method No. 4159-3
VERIFICATION:
AMMETER WITHIN TOLERANCE ___________
VOLTMETER WITHIN TOLERANCE ___________
AMPERE HOUR METER WITHIN TOLERANCE ___________
TIMER WITHIN TOLERANCE ___________
SERIAL NO: __________________________ DATE OF MANUFACTURE: ________________
VERIFIED BY: ________________________ DATE OF VERIFICATION:__________________
Lamar Technologies LLC certifies that the above listed P/N 4159 Battery Charger /
Discharger meets or exceeds all published specifications and complies with ISO 9000 where
applicable. Accuracies of calibration of instruments used are traceable to the National
Institute of Standards and Technology.