Instruction Manual

CERTIFICATION OF CALIBRATION
ALPHA C-25 Manual V2.1.doc Page 23
REPORT AND CERTIFICATION OF CALIBRATION
Lamar Technologies LLC, 14900 40th Ave. NE
Marysville, WA 98271 360-651-8869 www.lamartech.com/powerproducts
Date of Test ___________
S/N _____________ Model Alpha C-25_ MFR Date ________
Description:
Military Battery Charging Battery Discharge
Commercial Combination Charger/Discharger
NSN: 6130-01-462-6335 & 6130-21-258-4429
Notes on Calibration:
1. All instruments used for calibration are calibrated to standards traceable to
National Institute of Standards and Technology.
2. Test instruments are calibrated annually by a certified test laboratory in
compliance with the Calibration Systems Requirement of ISO/IE17025:2005,
ANSI/NCSL Z540-1-1994, and a quality system registered to ISO 9001:2008
Report: Test Instruments Used:
Fluke 8010A Fluke 73
Empro Standard Shunt,0.5% Leader Oscilloscope LS1020
Standard Cell Reference: Other: _____________________
EMF Reading for Multimeter
before each test to 1.019V.
Results:
All controls within specification.
All digital/analog displays within calibration specification.
Shipped condition all in tolerance, passed.
Tested by _________ Date _________ Approved By _________ Date _________
Calibration due one year from date of first use: Recommended
Required