Owner manual

LAKOSCookingOilFrySafeSystems
3
Introduction
Centrifugal solids-from-liquid separation by LAKOS Separators is efficiently achieved through
centrifugal action created by fluid velocity changes in the LAKOS Separator. LAKOS Separators
employ centrifugal action for the purpose of removing heavier-than-liquid fines and crumb
particulates. The LAKOS separator has no moving parts to wear out and no backwashing
requirements. In addition, LAKOS separators have a low and steady pressure loss; continuous
operation capabilities; and the capacity for little or no system liquid loss.
This Installation, Operation and Maintenance Manual will provide operators, maintenance
personnel and plant engineers with complete and comprehensive information regarding the
safe operation of the LAKOS Cooking Oil FrySafe Filtration System.
Warning!
This manual must be read and understood before attempting to install or operate the
system. Incorrect operation of the system may void any warranties on the system and may
endanger the operator and/or coworkers.
Please forward any comments, suggestions or issues regarding this manual or the LAKOS
Cooking Oil FrySafe Filtration System to:
Application Engineering, Cooking Oil Filtration
LAKOS, A Division of the Claude Laval Corporation
1365 North Clovis Avenue
Fresno, California 93727
Phone: [phone] Ext. 263
Fax: [phone]
E-Mail: [e-mail]
Website: www.LAKOS.com

