Owner manual

LAKOSCookingOilFrySafeSystems
11
Pre-Installation System and Installation
Area Check List
System
1. Inspect entire system for shipping damage.
2. Inspect the system’s frame and structural supports for damage incurred during
shipping, loading & unloading.
3. Inspect ancillary equipment (e.g. valves, shrouds) for operational deficiency.
4. Valves must open fully and close tightly.
5. Inspect the internal chambers of the separator and connecting pipes for foreign objects
or blockage.
6. Inspect tubing and fittings for tightness. Tighten if necessary.

Installation Area
1. Inspect soundness and levelness of the concrete foundation and surrounding
installation area
2. Inspect installation area for overhead electrical wires or piping that might interfere with
the installation of the system.
