Datasheet
Hybrid Thermal/EMI Absorber
RFP-DS-BSR MFS 012618
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end
user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or
consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies,
Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third
parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
AVAILABILITY
Standard sheets are 305 x 305mm (12”x12”).
Standard thicknesses are 0.25mm (0.010”), 0.50mm (0.020”), 1.0mm (0.040”), 1.5mm
(0.060”) and 2.54mm (0.100”)
For most applications material is supplied with a pressure sensitive adhesive.
It can be supplied with or without pressure sensitive adhesive (PSA).
Available in other thicknesses, sizes, and customer specified shapes upon request.
INSTRUCTIONS FOR USE
This material is designed to function directly in front of a metallic surface.
For applications where the service temperature exceeds 121°C (250°F), the material can
be bonded to most substrates by using an RTV silicone based adhesive in conjunction with
a suitable primer.
This material can be readily cut with a sharp knife and template. It is a very flexible
material and conforms to contoured surfaces.
Typical Attenuation for BSR / MFS