Datasheet

Eccosorb® HR
2
RFP-DS-HR 092815
A ny information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the
end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or
consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird
Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
INSTRUCTIONS FOR USE
• As the material is a gradient loaded absorber, the back side of the absorber is marked and
this side should be bonded to the surface. The front surface should face the incident
electromagnetic energy for proper performance.
• For optimal performance, Eccosorb HR should be bonded to a metal surface. If a metal
surface is not available, the absorber can be supplied with an aluminium foil backing (ML)
designated as HR-XX-ML.
• Our specific Eccostock® foam adhesive is recommended to bond Eccosorb HR.
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
60 65 70 75 80 85 90
Reflectivity (dB)
Frequency (GHz)
HR Reflectivity
HR-10 HR-15 HR-25