User's Manual
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ORDERING INFORMATION
- MODULE ACCESSORIES
- BLOCK DIAGRAM
- FUNCTIONAL BLOCK FEATURES
- TIWI-SL MODULE FOOTPRINT AND PIN DEFINITIONS
- PIN DESCRIPTIONS
- ELECTRICAL SPECIFICATIONS
- DEVICE POWER-UP AND ENABLE
- SPI HOST-CONTROLLER INTERFACE
- SOLDERING RECOMMENDATIONS
- CLEANING
- OPTICAL INSPECTION
- REWORK
- SHIPPING, HANDLING, AND STORAGE
- AGENCY CERTIFICATIONS
- AGENCY STATEMENTS
- OEM RESPONSIBILITIES TO COMPLY WITH FCC AND INDUSTRY CANADA REGULATIONS
- OEM LABELING REQUIREMENTS FOR END-PRODUCT
- OEM END PRODUCT USER MANUAL STATEMENTS
- MECHANICAL DATA
- DEVICE MARKINGS
- CONTACTING LS RESEARCH
TiWi-SL MODULE
DATASHEET
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0085-R0.4 Copyright © 2011 LS Research, LLC Page 10 of 36
ELECTRICAL SPECIFICATIONS
The majority of these characteristics are based on controlling and conditioning the tests using the
evaluation kit and TiWi-SL control software application. Other control conditions may require these
values to be re-characterized by the customer.
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Power supply voltage (VCC)
-0.5
+3.8
V
Voltage on digital pins
(1)
-0.5
VCC + 0.5
V
Voltage on EEPROM and UART test pins
(2)
-0.5
2.1
V
RF input power, antenna port
+10
dBm
Operating temperature
-30
+75
ºC
Storage temperature
-40
+85
ºC
(1) This includes the SPI signals and the PWR_EN signal.
(2) These signals are not intended for general purpose use.
Table 3: Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Min
Typical
Max
Unit
VCC
2.9
3.3
3.6
V
Voltage on digital pins
(1)
0
3.3
VCC
V
Voltage on EEPROM and UART test pins
(2)
0
1.8
V
Ambient temperature range
(3)
-30
25
75
ºC
(1) Applies to the SPI signals and the PWR_EN signal.
(2) These signals are not intended for general purpose use.
(3) The device can be reliably operated for 5000 active hours cumulative at T
ambient
of 85C.
Table 4: Recommended Operating Conditions