User's Manual

SiFLEX01 TRANSCEIVER MODULE
DATASHEET
The information in this document is subject to change without notice.
330-0026-R0.4 Copyright © 2010-2012 LS Research, LLC Page 14 of 23
ELECTRICAL SPECIFICATIONS
The majority of these characteristics are based on the use of developmental test firmware written by
LSR. Custom firmware may require these values to be re-characterized by the customer.
Absolute Maximum Ratings
Rating
Min
Max
Unit
Power supply voltage
0
3.6
V
Voltage on any pin with respect to ground
-0.3
Vcc + 0.3
V
RF input power
+10
dBm
Operating temperature range
-40
+85
ºC
Storage temperature
-50
+150
ºC
Table 3 Absolute Maximum Ratings
1
Recommended Operating Conditions
Characteristic
Min
Typ
Max
Unit
Power supply voltage (Vdd)
2.2
3.3
3.45
Vdc
Ambient temperature range
-40
25
85
ºC
Table 4 Recommended Operating Conditions
Module will NOT transmit, if VCC > 3.5V.
General Characteristics
Parameter
Min
Typ
Max
Unit
RF frequency range
906
924
MHz
RF data rate
0.8
500
kbps
Flash program memory
32
kB
RAM
4
kB
Flash data memory
512
B
Table 5 General Characteristics
1
Under no circumstances should exceeding the maximum ratings specified in the Absolute Maximum Ratings
section be allowed. Stressing the module beyond these limits may result permanent damage to the module that
is not covered by the warranty.