User's Manual

SiFLEX01 TRANSCEIVER MODULE
DATASHEET
The information in this document is subject to change without notice.
330-0026-R0.4 Copyright © 2010-2012 LS Research, LLC Page 13 of 23
DEVELOPMENT TOOLS
TI MSP-FET430UIF
Custom firmware development can be done on
the SiFLEX module using development tools
available thought TI. Shown in Figure 6, a
MSP-FETUIF USB interface is required. It
plugs directly into the SiFLEX Development
Board, and can easily be adapted to other
hardware. See the Texas Instruments website
for more information.
Figure 6 MSP-FET430UIF
IAR Embedded Workbench for MSP430
Also required is Embedded Workbench for TI
MSP430 from IAR Systems. IAR Embedded
Workbench for MSP430 is an integrated
development environment for building and
debugging embedded applications. Visit the
IAR Systems website for additional information.