User's Manual

SiFLEX02-HP TRANSCEIVER MODULE
DATASHEET
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0047-R0.7 Copyright © 2010-2011 LS Research, LLC Page 33 of 35
COMPATIBILITY
To maintain compatibility with other ModFLEX™ family transceiver modules it is important to use the
module pins in your application as they are designated in Figure 16. Since the available GPIO and
peripherals vary per micro, not all pins may be populated. For example on SiFLEX02-HP module pins
45-55 are not available (due to the number of GPIO available on the ATxMega256A3).
All attempts are made to lay out modules starting with the lowest number in the peripheral (ADC,
TMR/PWM, GPIO) series. For example if there are only two ADC’s available they will be brought out to
ADC1 and ADC2 (module pins 20 and 21).
GND
1
ModFLEX™
Generic Module Footprint
69
GND
GND
2 68
GND
GND
3 67
GND
NC
4 66
NC
NC
5 65
NC
NC
6 64
NC
NC
7 63
NC
NC
8 62
NC
JTAG - TMS
9 61
SPI - MOSI
JTAG - TDI
10 60
SPI - MISO
JTAG - TCK
11 59
SPI - SCK
JTAG - TDO
12 58
SPI - SS
JTAG/PDI/JRST 13 57
IIC - SDA
nReset
14 56
IIC - SCL
Analog REF
15 55
GPIO 16
Analog REF
16 54
GPIO 15
CMP+
17 53
GPIO 14
CMP-
18 52
GPIO 13
CMPOUT
19 51
GPIO 12
ADC1
20 50
GPIO 11
ADC2
21 49
GPIO 10
ADC3
22 48
GPIO 9
ADC4
23 47
GPIO 8
ADC5
24 46
GPIO 7
ADC6
25 45
GPIO 6
VCC - 3V3DC
26 44
GND
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
TMR/PWM 1 TMR/PWM 2 TMR/PWM 3 TMR/PWM 4 TMR/PWM 5 TMR/PWM 6 TMR/PWM 7 TMR/PWM 8
UART - TX
UART - RX
UART - CTS UART - RTS
GPIO 1 GPIO 2 GPIO 3 GPIO 4 GPIO 5
Figure 15 ModFLEX™ Generic Module Footprint