User's Manual
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ORDERING INFORMATION
- MODULE ACCESSORIES
- BLOCK DIAGRAM
- DEVELOPMENT KIT
- MODULE PINOUT AND PIN DESCRIPTIONS
- MODULE OVERVIEW
- OPERATING MODES TRUTH TABLE
- MODES OF OPERATION
- DEVELOPMENT TOOLS
- ELECTRICAL SPECIFICATIONS
- SOLDERING RECOMMENDATIONS
- CLEANING
- OPTICAL INSPECTION
- REWORK
- SHIPPING, HANDLING, AND STORAGE
- AGENCY STATEMENTS
- MECHANICAL DATA
- COMPATIBILITY
- MODULE REVISION HISTORY
- CONTACTING LS RESEARCH
SiFLEX02-HP TRANSCEIVER MODULE
DATASHEET
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0047-R0.7 Copyright © 2010-2011 LS Research, LLC Page 21 of 35
RF Characteristics
Transmitter Characteristics
(T
A
= 25°C, V
CC
= 3.3V, V
PA
= 4.0V, fc = 906-924 MHz)
Parameter
Test Conditions
Min
Typ
Max
Unit
Nominal max output power
(40kbps)
(Notes: 1, 2) 26 27 29 dBm
Nominal max output power
(250kbps and higher)
(Notes: 1, 2) 27 28 29 dBm
Programmable output power range
22 Steps
15
28
dBm
Harmonics (2fo)
-50
dBm
Harmonics (3fo)
-55
dBm
Error vector magnitude
10
35
% rms
Table 9 Transmitter RF Characteristics
Note 1: In accordance with FCC Part 15.247(e) and RSS 210 A8.2(b), the peak power spectral density
should not exceed +8 dBm in any 3 KHz band.
Note 2: In accordance with Australian/New Zealand 4268 : 2008, the peak power spectral density
should not exceed +14dBm in any 3 KHz band in the 915 to 928 MHz frequency band.