User's Manual
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ORDERING INFORMATION
- MODULE ACCESSORIES
- BLOCK DIAGRAM
- DEVELOPMENT KIT
- MODULE PINOUT AND PIN DESCRIPTIONS
- MODULE OVERVIEW
- OPERATING MODES TRUTH TABLE
- MODES OF OPERATION
- DEVELOPMENT TOOLS
- ELECTRICAL SPECIFICATIONS
- SOLDERING RECOMMENDATIONS
- CLEANING
- OPTICAL INSPECTION
- REWORK
- SHIPPING, HANDLING, AND STORAGE
- AGENCY STATEMENTS
- MECHANICAL DATA
- COMPATIBILITY
- MODULE REVISION HISTORY
- CONTACTING LS RESEARCH
SiFLEX02-HP TRANSCEIVER MODULE
DATASHEET
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0047-R0.7 Copyright © 2010-2011 LS Research, LLC Page 18 of 35
DEVELOPMENT TOOLS
AVR Studio
AVR Studio® is an Integrated Development
Environment (IDE) for writing and debugging
AVR® applications in Windows®
9x/NT/2000/XP/Vista(32- and 64-bit)
environments. AVR Studio 4 includes an
assembler, simulator, and in-circuit debugger.
AVR Studio is the Integrated Development
Environment (IDE) developed by Atmel for
writing and debugging Atmel AVR applications.
Eclipse
Eclipse is an IDE for C/C++ developers.
The Eclipse IDE requires a Java Runtime
Environment (JRE) be installed on your
machine to run. While it can run using a Java
1.4 JRE, a Java5 JRE (minimum) is
recommended.
See the SiFLEX02-HP User’s Guide for detailed
instructions for installing Eclipse and integrating
it with AVR Studio and WinAVR.
WinAVR
WinAVR is a suite of executable, open source
software development tools for the Atmel AVR
series of RISC microprocessors hosted on the
Windows platform. It includes the GNU GCC
compiler for C/C++.
WinAVR contains all the tools for developing on
AVR family microcontrollers from Atmel. This
includes avr-gcc (compiler), avrdude
(programmer), avr-gdb (debugger), and more.
AVR JTAGICE mkII
Custom firmware development can be done on
the SiFLEX02-HP module using development
tools available through Atmel. Shown in Figure
12, a JTAGICE mkII interface is required. It
plugs into the ModFLEX™ Development Board,
and can easily be adapted to other hardware.
See the Atmel website for more information and
ordering options.
Figure 12 AVR JTAGICE mkII
AVRISP mkII
Another option for in-circuit programming is the
AVRISP mkII from Atmel, Figure 13. The
AVRISP mkII combined with AVR Studio® can
program new AVR 8-bit RISC microcontrollers
with ISP Interface.
Figure 13 AVRISP mkII
IAR Embedded Workbench for Atmel
AVR
Another option is IAR Embedded Workbench
for Atmel AVR. IAR Embedded Workbench for
AVR is an integrated development environment
for building and debugging embedded
applications. Visit the IAR Systems website for
additional information.