User's Manual

Table Of Contents

SiFLEX02 TRANSCEIVER MODULE

MODULE USER’S GUIDE

5.2 Wire Antenna

5.2.1 Footprint

The wire antenna and solder protruding on the bottom side of the module needs to be

seated in a hole so the module does not lift off the host board. See the footprint

information in the datasheet for the location of this hole.

Figure 4 Hole in carrier board when using wire antenna

5.2.2 Performance with Wire Antenna

The best antenna performance can be achieved by having the wire antenna

perpendicular to the module as illustrated below.

Figure 5 Best performance with wire antenna

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision from www.lsr.com.